Specification

06/2020 | www.dap.com

DAP

ECLIPSE

Rapid Wall Repair Patch

DAP

ECLIPSE

Rapid Wall Repair Patch is a unique and innovative drywall repair solution that is

perfect for completing permanent repairs on damaged walls and ceilings. This specially formulated, self-

adhesive patch allows you to finish your project faster. It is easy to apply and mess-free allowing you to

patch and paint immediately without the need for spackling or sanding. This all-in-one, mess free solution

not only provides a permanent, long-lasting repair but is also stronger than drywall itself making it perfect

for areas that may see reoccurring impact, such as behind a door. It is as simple as patch, paint, and

finish. For interior use only.

• DAP’S FASTEST, STRONGEST & THINNEST DRYWALL REPAIR SOLUTION

• Stronger Than Drywall Itself*

• Superior Impact Resistance

• All-In-One, Mess-Free

• No Spackling, Sanding or Tools Required

• Finish Project Faster

• Paint Immediately & Finish in Minutes

• Permanent, Long-Lasting

• Won’t peel or lose adhesion over time

• Ideal for repairing damage on drywall wall and ceiling

*6-inch patch is 4X Stronger and 4-inch patch is 2X Stronger than drywall itself

PACKAGING

COLOR

UPC

4 – 2 Inch Repair Patch

Clear

0 70798 09162 7

1 – 4 Inch Repair Patch

Clear

0 70798 09164 1

1 – 6 Inch Repair Patch

Clear

0 70798 09166 5

PRODUCT DESCRIPTION

KEY FEATURES & BENEFITS

PAGE 1
DAP® ECLIPSETM Rapid Wall Repair Patch PRODUCT DESCRIPTION DAP® ECLIPSETM Rapid Wall Repair Patch is a unique and innovative drywall repair solution that is perfect for completing permanent repairs on damaged walls and ceilings. This specially formulated, selfadhesive patch allows you to finish your project faster. It is easy to apply and mess-free allowing you to patch and paint immediately without the need for spackling or sanding.
PAGE 2
SUGGESTED USES Ideal for completing permanent repairs on damaged walls and ceilings.
PAGE 3
Place: Holding the outer edges of the patch, position the grey center circle of the patch over the center of the damage and completely smooth and adhere the patch to the surrounding drywall using your hand. Press firmly against drywall to ensure adhesion but only press where the patch is in contact with the drywall. Do not push through the damaged area and do not remove the DAP pop-up tab or protective layer until after first coat of paint.
PAGE 4
TYPICAL PHYSICAL & CHEMICAL PROPERTIES Vehicle Transparent film Application & Service Temperature 55°F- 90°F Shelf Life 24 months Freezing Freeze/Thaw stable 5 cycles at 0°F Dry Time See paint manufacturer recommendations for dry time. The paint will dry slower on the patch than the surrounding drywall. CLEAN UP & STORAGE Store patches inside in a cool, dry place away from extreme heat or cold. SAFETY See product label and Safety Data Sheet (SDS) for health and safety information.