Specification

06/2020 | www.dap.com
Ideal for completing permanent repairs on damaged walls and ceilings.
• DAP Eclipse 2-Inch Rapid Wall Repair Patch: repairs damage up to 1 inch in diameter and is
ideal for small repairs such as nail holes, nail pops, screw holes, anchor damage and cable cord
removal damage
• DAP Eclipse 4-Inch Rapid Wall Repair Patch: repairs damage up to 2 inches in diameter and is
ideal for medium repairs and everyday wall damaged caused by moving furniture, roughhousing,
or relocating towel racks or toilet paper holders
• DAP Eclipse 6-Inch Repair Patch: repairs damage up to 3 inches in diameter and is ideal for
larger repairs and specifically designed to withstand doorknob impact
Make sure to follow the preparation instructions prior to completing the repair (prepping the drywall
surface is one of the most important steps to achieving professional results).The smoother your drywall
surface is prior to patching, the smoother your finished repair will be.
After removing the protective layer utilizing the pop-up tab, apply two additional thick coats of paint.
Using a primer coat will increase paint adhesion and improve dry time.
Do not apply when temperatures are below 40°F.
Not for exterior use or on wet or damp surfaces.
Prep: Push in damaged or rough edges to the inside of the wall and sand drywall
damage and surrounding area smooth using sandpaper. Using a dry or damp
cloth, clean the surface to be repaired to remove any dirt, dust, and debris,
making sure you have a smooth, dust-free surface. If you use a damp cloth,
make sure the entire surface is dry before applying Eclipse Rapid Wall Repair
Patch.
Peel: Using the easy-to-remove slit, remove the patch from the back, white
carrier sheet (like removing a sticker) exposing the entire adhesive surface of the
patch.
SUGGESTED USES
FOR BEST RESULTS
APPLICATION