Specification

06/2020 | www.dap.com
Place: Holding the outer edges of the patch, position the grey center circle of the
patch over the center of the damage and completely smooth and adhere the
patch to the surrounding drywall using your hand. Press firmly against drywall to
ensure adhesion but only press where the patch is in contact with the drywall. Do
not push through the damaged area and do not remove the DAP pop-up tab or
protective layer until after first coat of paint.
Paint: Paint immediately with a high-quality paint roller and interior latex paint.
Recommend painting with light pressure and applying copious amount of paint.
NO SPACKLING OR SANDING NECESSARY.
Remove: After first coat of paint is applied and surrounding drywall is dry,
remove the clear protective layer by pulling the pop-up tab.
Finish: Apply two additional thick coats of paint for a smooth and invisible repair.
DAP Eclipse can also be used for textured walls & ceilings with use of aerosol
spray textures or textured paint rollers*
*If using DAP Eclipse Rapid Wall Repair Patches on textured walls, skip step 4 and move directly to step
5 by removing the protective layer immediately after patching the damaged surface. Then apply texture
using aerosol spray textures of textured paint rollers to match existing wall surface.