Use and Care Manual

ManualsBrandsDAP ManualsBuilding materialsPlaster of Paris 4 lbs. White Dry Mix

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 3/23/2010

DAP

Plaster of Paris- Dry Mix

• Sets hard in 20 to 30 minutes for quick repairs

• Professional quality, for repairs in plaster walls and ceilings

• Easy to sand and paint

• Non-shrinking

• Smooth, bubble free formula

Packaging: 4 lb. bag, 8 lb. bag, 25 lb. bag, 4 lb. box

Color: White

UPC Number: 70798 10308, 70798 10310, 70798 10312, 70798 10318

Company Identification:

Manufacturer: DAP Products Inc., 2400 Boston St., Ste. 200, Baltimore, Maryland 21224

Usage Information: DAP HELPLINE: 888-DAP-TIPS, or call 1-888-DAP-TIPS or visit dap.com & click on

"Ask the Expert".

Order Information: 800-327-3339

Fax Number: 410-534-2650

Product Description:

DAP

Plaster of Paris may be used to fill holes in interior plaster walls and ceilings. Its easy-to-mix formula

dries to a dense, durable finish that resists paint absorption. DAP

Plaster of Paris sets quickly and can be

painted with any oil or latex-based paint when dry. DAP

Plaster of Paris can also be used for mold making,

casting sculpted figures, and hobby and craft applications.

Suggested Uses:

Ideal for the patching of interior plaster walls and ceilings as well as mold making, casting sculpted figures and

hobby and craft applications. DO NOT attempt to make a cast enclosing any part of the body using this

material. Failure to follow these instructions may cause severe burns that may require surgical removal of

affected tissues.

Surface Preparation & Application:

1. Surface must be clean and free of wallpaper, loose paint, loose plaster, wax, dust and dirt.

2. Undercut edges of existing plaster so patch anchors around opening.

3. Lightly dampen with water the area to be patched.

4. Add DAP

Plaster of Paris to clean water in a clean container mixing 2 parts powder to 1 part cold water

(40°F to 50°F). Stir to a smooth consistency. Do not mix more material than can be used in 6-10

minutes. Discard any material that has begun to harden.

5. Apply the DAP

Plaster of Paris with a clean putty knife or trowel filling around edges. Remove excess

material so that plaster is level and flush with the surface being patched.

6. For large, deep openings apply a base layer and allow it to dry. When the base layer is dry, wet the

surface and apply the finish layer to patch. When thoroughly dry, sand smooth. Make sure the plaster is

completely dry and hard before painting.

Summary of content (2 pages)

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 3/23/2010 DAP® Plaster of Paris- Dry Mix • • • • • Sets hard in 20 to 30 minutes for quick repairs Professional quality, for repairs in plaster walls and ceilings Easy to sand and paint Non-shrinking Smooth, bubble free formula Packaging: Color: UPC Number: 4 lb. bag, 8 lb. bag, 25 lb. bag, 4 lb.
PAGE 2
7. For mold making, sculpted figure casting, and hobby and craft applications, please see the Technical Data Bulletin for DAP® Plaster of Paris- Hobby & Craft. For Best Results: • Use cold water (40°F to 50°F) when mixing. • Sand as needed before decorating. Wet sanding is recommended to avoid creating dust. • Always use a good quality oil or latex-based paint for a professional finish. • For repairs requiring a longer work time (over 6-10 minutes), use DAP® Plaster Wall Patch.