Use and Care Manual

7. For mold making, sculpted figure casting, and hobby and craft applications, please see the Technical

Data Bulletin for DAP

Plaster of Paris- Hobby & Craft.

For Best Results:

• Use cold water (40°F to 50°F) when mixing.

• Sand as needed before decorating. Wet sanding is recommended to avoid creating dust.

• Always use a good quality oil or latex-based paint for a professional finish.

• For repairs requiring a longer work time (over 6-10 minutes), use DAP

Plaster Wall Patch.

Physical & Chemical Characteristics:

Vehicle: Plaster

Filler: Calcium Carbonate

Working Time: 6 to 10 minutes

etting Time: 20-30 minutes

Final Curing: 3 days

Coverage: (1.81kg) covers 2.25 sq. ft., 25 lbs (11.34kg) covers 14 sq. ft., depending

on thickness of patch.

MSDS No.: 000710081001

Clean Up:

Clean tools with water immediately after use. Dried material must be cut, scraped or sanded away. Tightly seal

container of unused material and store in a cool dry place.

Safety:

See product label and Material Safety Data Sheet for safety information. You can request an MSDS sheet by

visiting our website at www.dap.com or by calling 888-DAP-TIPS.

Warranty Information:

If you are not satisfied with this product’s performance when used as directed, return used container and sales

receipt to DAP Products Inc., Technical Customer Service, 2400 Boston Street, Suite 200, Baltimore, MD

21224 for product replacement or sales price refund. DAP will not be liable for incidental or consequential

damages.