Use and Care Manual

Physical & Chemical Characteristics:

Drying Time: Approximately three to seven days depending on

temperature, humidity and fill volume

Odor: Slight

Consistency: Paste

Vehicle: Synthetic Polymer Latex

Volatile: Water

Filler: Inorganic Filler

Weight per Gallon: 15.2 ± .2 pounds

Solids: 88 ± 0.5% by weight

Temperature Service Range: -20ºF to 160ºF

Temperature Application Range: 40°F (and rising) to 90°F (and falling)

Shelf Life: 12 months in an unopened container

Freezing: Freeze/Thaw stable five cycles

Coverage:

MSDS No.: 00010404001

Clean Up & Storage:

Clean tools immediately after use with warm water. Dry material must be cut or scraped away. Be sure

cartridge is closed and tightly sealed. Store in a cool, dry place.

Safety:

See product label and Material Safety Data Sheet (MSDS) for safety information. You can request an

MSDS by visiting our website at dap.com or by calling 1-888-DAP-TIPS.

Limited Warranty:

DAP warrants this product, when applied in accordance with the requirements and directions set forth in

DAP's label and technical bulletin, to be free from defects in materials, but makes no warranty as to

appearance or color. Since methods of application and construction and environmental conditions are

beyond DAP's control and could affect performance, DAP makes no other warranties, express or

implied, including warranties of MERCHANTABILITY and FITNESS FOR A PARTICULAR

PURPOSE. With respect to this product, DAP's sole obligation shall be to replace, or to refund the

purchase price for, the quantity of this product proved to be defective. DAP shall not be liable for any

other losses or damages, including incidental or consequential damages. If a product defect is

encountered, call DAP Products Inc., Technical Customer Service, at 888-DAP-TIPS for further

information.