TDS

ManualsBrandsDAP ManualsCaulkDynaflex Ultra 10.1 oz. White Advanced Exterior Window, Door, and Siding Sealant

2/25/2019

DAP

DYNAFLEX ULTRA

™

Advanced

Exterior Sealant for Windows, Doors, Siding

& Trim

DAP

DYNAFLEX ULTRA

™

Advanced Sealant for Window, Door, Siding & Trim applications is

formulated with innovative Weather Max

Technology

™

to resist UV fading, chalking, crumbling, cracking

and dirt build up. It also has a lifetime mold, mildew and algae resistance guarantee, so the sealant stays

looking clean and new. DYNAFLEX ULTRA

™

has strong adhesion to common building materials and stays

permanently flexible for a long-lasting, weatherproof seal that provides All Weather Protection and stands

up to the elements. It is rain ready and paintable in only one hour for better productivity. Does not bubble.

The sealant guns out effortlessly and tools smoothly for easy application. Low in odor and easy water clean-

up. Meets ASTM C920, Class 35 and complies with AAMA 802.3 Type 1, AAMA 803.3 Type 1 and AAMA

808.3 Type 1. VOC compliant. Exterior/interior use.

PACKAGING COLOR UPC

10.1 fl oz (300 mL) Cartridge White

7079818211

10.1 fl oz (300 mL) Cartridge

Beige

7079818213

10.1 fl oz (300 mL) Cartridge

Clay

7079818214

10.1 fl oz (300 mL) Cartridge

Brown

7079818217

10.1 fl oz (300 mL) Cartridge

Cedar Tan

7079818221

10.1 fl oz (300 mL) Cartridge

Light Gray

7079818219

10.1 fl oz (300 mL) Cartridge

Iron Gray

7079818215

10.1 fl oz (300 mL) Cartridge

Dark Bronze

7079818216

10.1 fl oz (300 mL) Cartridge

Black

7079818220

PRODUCT DESCRIPTION

Summary of content (5 pages)

PAGE 1
DAP® DYNAFLEX ULTRA™ Advanced Exterior Sealant for Windows, Doors, Siding & Trim PRODUCT DESCRIPTION DAP® DYNAFLEX ULTRA™ Advanced Sealant for Window, Door, Siding & Trim applications is formulated with innovative Weather Max Technology™ to resist UV fading, chalking, crumbling, cracking and dirt build up. It also has a lifetime mold, mildew and algae resistance guarantee, so the sealant stays looking clean and new.
PAGE 2
KEY FEATURES & BENEFITS              Formulated with innovative Weather Max Technology for All Weather Protection Resists UV fading, yellowing & dirt pick-up Won’t crack, crumble, chalk, bubble or break down Lifetime mold, mildew & algae resistance guarantee Sealant stays looking clean & new 1 hour rain & paint ready 100% waterproof & weatherproof seal Permanently flexible Strong adhesion to wide variety of common building materials Easy water clean-up & low odor VOC compliant Meets ASTM C920,
PAGE 3
FOR BEST RESULTS       Apply in temperatures above 40°F. Do not apply when freezing temperatures are forecasted within 24 hours. Cooler temperatures and higher humidity will slow down dry time. Not for continuous underwater use, high temperature surfaces or surface defects. Priming not usually necessary. Priming only required if testing indicates a need or where sealant will be constantly subjected to high levels of moisture after cure. Joint size should not exceed 1" wide by 1/2" deep.
PAGE 4
TYPICAL PHYSICAL & CHEMICAL PROPERTIES Typical Uncured Physical Properties Appearance/Consistency Gunnable, non-sag paste Base Polymer Proprietary synthetic latex Filler Calcium carbonate Volatile Water Weight % Solids 74% Density (lbs per gallon) 11 Odor Very mild Clean Up Water Flash Point >212°F Freeze Thaw Stability (ASTM C1183) Passes 5 cycles Shelf Life 12 months Coverage 55 linear feet at 3/16” diameter bead Typical Application Properties Application Temperature Range 40ºF t
PAGE 5
CLEAN UP & STORAGE Clean up excess wet sealant with a damp sponge before it skins over. Excess dried sealant must be cut or scraped away. Clean hands and tools with warm water and soap. Store container in a cool, dry place away from extreme heat or cold. SAFETY See product label and Safety Data Sheet (SDS) for health and safety information. You can request a SDS by visiting our website at dap.com or calling 888-DAP-TIPS.