Use and Care Manual

ManualsBrandsDAP ManualsPaint3.0 Advanced Self-Leveling Concrete Sealant

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 06-06-12

DAP

3.0™ Advanced Self-Leveling Concrete Sealant

• 100% waterproof

• Self leveling- No tooling required

• Paintable

• Withstands foot & vehicle traffic after fully cured

• Shrink & crackproof guarantee

• Lifetime guarantee

• Caulk and expose to water after just 3 hours

Packaging: 9.0 fl. oz. (266 mL)

Color: Gray

UPC Number: 0 70798 18370 4

Company Identification:

Manufacturer: DAP Products Inc., 2400 Boston St., Suite 200, Baltimore, Maryland 21224

Usage Information: DAP HELPLINE: 888-DAP-TIPS, 9:00 am to 7:00 pm EST.

Order Information: 800-327-3339

Fax Number: 410-534-2650

Also, visit the DAP website at www.dap.com.

Product Description:

DAP

3.0™ is an advanced self-leveling concrete and mortar sealant that requires no tooling, making it ideal

for filling cracks and gaps in horizontal surfaces. Withstands foot & vehicle traffic after fully cured. It can be

applied in all weather and below freezing temperature applications. It won’t crack or shrink & provides

excellent adhesion, flexibility and durability for a permanent waterproof seal. It can be exposed to water and

moisture after only three hours without washing out rather than the 24-36 hour waiting period other caulks and

sealants may require. It is paintable, low odor and VOC compliant. Backed by a lifetime guarantee. ASTM

C920 Type S grade P Class 12.5

Suggested Uses:

Ideal for sealing horizontal cracks, gaps and holes in:

• Concrete driveways

• Steps

• Above ground foundations

• Other concrete surfaces

• Sidewalks

• Patios

• Garage floors

Adheres to:

• Concrete

• Mortar

• Stone

• Brick

• Masonry

• Wood

• Other construction materials

Summary of content (3 pages)

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 06-06-12 DAP® 3.0™ Advanced Self-Leveling Concrete Sealant • • • • • • • 100% waterproof Self leveling- No tooling required Paintable Withstands foot & vehicle traffic after fully cured Shrink & crackproof guarantee Lifetime guarantee Caulk and expose to water after just 3 hours Packaging: Color: UPC Number: 9.0 fl. oz.
PAGE 2
Performance Characteristics: • Accelerated cure time allows exposure to water and moisture after only three hours without washing out. • 100 waterproof which provides a permanently waterproof seal. • Cured sealant is mold and mildew resistant. • Won’t crack or shrink. • Paintable with most acrylic latex paints. Use an acrylic primer before painting with oil-based paints. Sealant reaches full cure in 24 hours. Restrain or limit any traffic until then. Surface Preparation & Application: 1.
PAGE 3
Note: The physical properties were tested under standard conditions of 23ºC (73ºF) at 50% relative humidity. Typical characteristic values should not be used as specifications. Clean Up: Before curing, remove excess material from surface and tools with mineral spirits. Clean hands with soap and water. After product has cured, excess material must be cut or scraped away. Safety: See product label and Material Safety Data Sheet (MSDS) for safety information.