Product Brochure

Technical Bulletin
2400 Boston Street, Suite 200, Baltimore, Maryland 21224
Phone: [phone] or 800-543-3840
Revised: 7/28/05
DAP® Bondex® Flexible Floor Patch and Leveler
• For Plywood Subfloors and Concrete
• Crack Resistant Formula
• Can Be Feather Edged
Company Identification:
Manufacturer: DAP Inc.
Marketed by: DAP Inc., 2400 Boston Street, Baltimore, Maryland 21224
Usage Information: DAP HELPLINE: 888-DAP-TIPS, 9:00 am to 7:00 pm EST.
Order Information: 800-327-3339
Fax Number: 410-534-2650
Also, visit the DAP website at www.dap.com.
Product Description:
DAP® Bondex® Flexible Floor Patch and Leveler is a ready-to-use latex based product used to fill cracks,
fasteners or knotholes, and level low areas in plywood subfloors or concrete surfaces. The Floor Patch and
Leveler will remain flexible allowing the plywood subfloor to flex without cracking the filled-in areas.
Suggested Uses
It is ideal for filling and leveling surfaces prior to the installation of carpeting, vinyl floor tile or sheeting as
well as ceramic or mosaic floor tile.
Surface Preparation & Application
• Surfaces to be filled or leveled must be clean, dry and free of all loose material, oil and grease.
• All old adhesive, wax or coating must be removed prior to application.
• Using a broad knife or a smooth face trowel, apply the Floor Patch and Leveler directly to the area to be
filled.
• Apply up to ¼ inch and let dry approximately 6 hours to a hard consistency. For thickness greater than ¼
inch, apply in multiple coats allowing each coat to dry completely between application.
• Feather edge all applications to ensure a smooth surface.
• Maximum application depth is ¾ of an inch.
• Test for dryness by pressing a coin to patch. No indentation indicated sufficient dry time for adhesive
application.
Physical & Chemical Characteristics:
Coverage: One quart fills 3 to 4 square feet ¼ inch thick.
Consistency: Paste
Drying time: 6 hours
Storage: Protect from freezing. Close lid tightly after each use.
Shelf Life: 1 year
Temperatures: Apply above 40°F
1