Technical Specifications

ManualsBrandsDAP ManualsAdhesiveWeldwood® Contact Cement Original Spray Adhesive - 14 oz.

08/2018 | www.dap.com

DAP

Weldwood® Original Contact Cement Spray

Adhesive

DAP® Weldwood® Original Spray Adhesive is a web formula that provides a long-lasting permanent

bond on contact. When cured Weldwood® Original is high heat resistant, water resistant, and creates a

flexible bond. It is ideal for use on trim work, door panels, decorative laminates, upholstery work, and

many other demanding applications.

• Web spray

• Provides a permanent bond on contact.

• Ideal for upholstery and trim work.

Adheres to:

• Foils

• Wood

• Veneer

• Laminate

• Upholstery

• Plastics

• Papers

• Carpeting

• Foams

• Felt

• Metals

• Cardboard

PACKAGING

COLOR

UPC

11 OZ. NET. WT

Clear

7079800119

14 OZ. NET. WT

Clear

7079800120

PRODUCT DESCRIPTION

KEY FEATURES & BENEFITS

SUGGESTED USES

Summary of content (4 pages)

PAGE 1
DAP® Weldwood® Original Contact Cement Spray Adhesive PRODUCT DESCRIPTION DAP® Weldwood® Original Spray Adhesive is a web formula that provides a long-lasting permanent bond on contact. When cured Weldwood® Original is high heat resistant, water resistant, and creates a flexible bond. It is ideal for use on trim work, door panels, decorative laminates, upholstery work, and many other demanding applications. PACKAGING COLOR UPC 11 OZ. NET. WT Clear 7079800119 14 OZ. NET.
PAGE 2
APPLICATION Preparation: 1. SAFETY FIRST! PRODUCT IS EXTREMELY FLAMMABLE WHILE DISPENSING! READ AND UNDERSTAND ALL OF THE PRECAUTIONARY MEASURES FOR USE, HANDLING, STORAGE AND DISPOSAL CONTAINED IN THE PRODUCT LABEL AND SAFETY DATA SHEET (SDS). 2. Extinguish all ignition sources during use and cure. 3. Shakewell for 1-2- minutes before using. 4. Be sure surfaces to be bonded are clean, dry, and free of all foreign materials. 5. Remove red applicator lock from spray can by sliding upwards and discarding.
PAGE 3
TYPICAL PHYSICAL & CHEMICAL PROPERTIES Adhesive Base: Synthetic Rubber Open Time: Up to 2 hours Volatile: Organic solvent Application Temperature: 60°F to 80°F Service Temperature Range: 0°F to 180°F Coverage: Odor: Approximately 100 sq. ft. per can on a single surface. Coverage will vary depending on porosity of substrates. Solvent Freeze Thaw Stability: Stable Shelf Life: 12 months CLEAN UP & STORAGE Clean excess wet adhesive from surfaces and tools with mineral spirits.
PAGE 4
COMPANY IDENTIFICATION Manufacturer: DAP Products Inc., 2400 Boston Street, Baltimore, Maryland 21224 Usage Information: Call 888-DAP-TIPS or visit dap.com & click on "Ask the Expert" Order Information: 800-327-3339 or orders@dap.com Fax Number: 410-558-1068 Also, visit the DAP website at dap.com 08/2018 | www.dap.