Technical Specifications
08/2018 | www.dap.com
Adhesive Base:
Synthetic Rubber
Open Time:
Up to 2 hours
Volatile:
Organic solvent
Application Temperature:
60°F to 80°F
Service Temperature Range:
0°F to 180°F
Coverage:
Approximately 100 sq. ft. per can on a single surface.
Coverage will vary depending on porosity of substrates.
Odor:
Solvent
Freeze Thaw Stability:
Stable
Shelf Life:
12 months
Clean excess wet adhesive from surfaces and tools with mineral spirits. Dried adhesive must cut or
scraped away. Clean hands with warm water and soap. DO NOT use solvents to remove product from
skin. Store container in cool, dry place away from extreme heat or cold.
See product label or Safety Data Sheet (SDS) for health and safety information. You can request an SDS
sheet by calling 888-DAP-TIPS or by visiting our website at dap.com.
LIMITED WARRANTY: If product fails when used as directed within one year of purchase, DAP will
provide replacement product or refund sales price: call 888-DAP-TIPS with your sales receipt and product
container available, to arrange for warranty fulfillment. DAP is not liable for incidental or consequential
damages.
TYPICAL PHYSICAL & CHEMICAL PROPERTIES
CLEAN UP & STORAGE
SAFETY
WARRANTY