Use and Care Manual

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 7/17/06

DAP

SIDE WINDER® Advanced Polymer

Siding & Window Sealant

• All Weather & Sub-Zero Application

• Wet Weather Washout Resistance

• No Cracking/Shrinking

• Primerless Adhesion

• Low Odor/Low VOC’s

• Paintable

• Meets ASTM C 920

• Lifetime Durability Guarantee

Packaging: 10.1 FL. OZ. Cartridges

Color: White, Clay, Light Gray, Tan, Almond, Cedar, Medium Gray, Off White,

Canvas, Terra Bronze, and Sandtone.

UPC Numbers: 70798 00801, 00804, 00807, 00810, 00813, 00823, 00835, 00840, 00843,

00846, 00849.

Company Identification:

Manufacturer: DAP Inc, 2400 Boston Street, Baltimore, Maryland 21224

Usage Information: DAP HELPLINE: 888-DAP-TIPS, 9:00 a.m. to 7:00 p.m. EST

Order Information: 800-327-3339

Also, visit the DAP website at www.dap.com.

Product Description

DAP Side Winder® Advanced polymer formula siding and window sealant delivers excellent

performance on vinyl, fiber cement, aluminum, wood siding and windows. It forms a flexible,

watertight and weatherproof seal that withstands up to +/-25% total joint movement. It offers

wet weather and low temperature application. It is paintable and has virtually no VOC’s (less

than 1%). Low odor. Interior/exterior use. Meets ASTM Specification C 920, Type S, Grade

NS, Class 25, Use NT, A, G, M and O.

Suggested Uses

Ideal for Sealing:

• Siding/Trim

•

Windows/Doors

• Gutter/Flashing

• Ducts/Vents

• Corner & Butt Joints

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 7/17/06 DAP® SIDE WINDER® Advanced Polymer Siding & Window Sealant • • • • • • • • All Weather & Sub-Zero Application Wet Weather Washout Resistance No Cracking/Shrinking Primerless Adhesion Low Odor/Low VOC’s Paintable Meets ASTM C 920 Lifetime Durability Guarantee Packaging: Color: UPC Numbers: 10.1 FL. OZ.
PAGE 2
Excellent Adhesion to: • Vinyl • Aluminum • Fiber cement • Wood • Glass • Tile • Metal • Masonry* • Brick* • Concrete* • Plastic • Drywall/plaster *Note: For application on masonry, brick and concrete, surface must be dry to obtain maximum adhesion. Primer is recommended for applications exposed to water.
PAGE 3
Cure Time: 24 hours (Cure times will vary with changes in temperature. Allow for extended cure time in sub-zero temperatures.) Packaging: 10.1 fluid ounce cartridges (300 mL) Shelf Life: 1 Year Coverage: 50 linear feet at 3/16” diameter bead MSDS: 00010029001 Clean Up: Before curing, remove excess material with a solvent-moistened towel. After product has cured, material must be cut or scraped away. Wipe off all excess sealant before cleaning. Clean tools with mineral spirits.