Use and Care Manual

ManualsBrandsDAP ManualsPaint10.1 oz. Clear Kitchen and Bath 100% Silicone Rubber Sealant (12-Pack)

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 10-10-13

DAP® Kitchen and Bath 100% Silicone Sealant

• Cured sealant is mildew resistant

• Watertight seal

• Long-lasting flexibility

• Minimal shrinkage

Packaging: 10.1 fluid ounce cartridge (300mL)

Colors: White, Clear

UPC No: 70798 08640, 08648

Company Identification:

Manufactured for: DAP Products Inc., 2400 Boston Street, Baltimore, Maryland 21224

Usage Information: DAP HELPLINE: 888-DAP-TIPS, 9:00 am to 7:00 pm EST

Order Information: 800-327-3339

Also, visit the DAP website at www.dap.com.

Product Description:

DAP® 100% Silicone Kitchen and Bath Sealant is a one component, acetoxy cure material ideal for caulking

and sealing in kitchen and bath areas. It provides a durable, watertight seal with minimal shrinkage. It offers

long-lasting flexibility and excellent adhesion. Once cured, it is unaffected by temperature extremes (-40F to

400F). Cured sealant in mildew resistant. When tested in accordance with ASTM C719, meets C920

specification for Class 25, Uses G & A

Suggested Uses:

Ideal for caulking and sealing:

• Tubs

• Sinks

• Showers

• Toilets

• Fixtures

• Countertops

• Backsplashes

• Repairing loose tiles

Adheres to:

• Glass

• Ceramic

• Fiberglass

• Porcelain

• Non-oily woods

• Most metals (see For Best Results section)

• Most plastics and rubbers

• Painted surfaces

Surface Preparation & Application:

• Remove old caulk from surface. Prepare a clean, dry surface which is free of loose debris, dust, dirt, soap,

oil or grease.

• When using 2.8 oz squeeze tube, remove cap and puncture inner seal with other side of cap. Screw on

nozzle and cut at 45° angle to desired bead size.

• Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal. Load into caulking gun.

Summary of content (3 pages)

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 10-10-13 DAP® Kitchen and Bath 100% Silicone Sealant • • • • Cured sealant is mildew resistant Watertight seal Long-lasting flexibility Minimal shrinkage Packaging: Colors: UPC No: 10.1 fluid ounce cartridge (300mL) White, Clear 70798 08640, 08648 Company Identification: Manufactured for: DAP Products Inc.
PAGE 2
• • • • • • • • Apply sealant to surface, pushing sealant ahead of nozzle. Smooth bead with finishing tool if necessary. Clean up excess uncured sealant from surface and tools with mineral spirits. Excess cured sealant must be cut or scraped away. Wash hands with soap and water. Allow 24 hours for sealant to cure. Sealant will not cure in totally confined spaces. When applying to hard rubber or plastic surfaces, lightly sand or roughen surface before application to maximize adhesion.
PAGE 3
Safety: See product label and Safety Data Sheet (SDS) for safety information. You can request an SDS by visiting our website at www.dap.com or by calling 888-DAP-TIPS. Satisfaction Guaranteed: If not satisfied with product performance within one year of purchase, return used container and sales receipt to DAP Inc., Technical Customer Service, 2400 Boston Street, Suite 200, Baltimore, MD 21224 for product replacement or sales price refund. DAP will not be liable for incidental or consequential damages.