Technical Specifications

ManualsBrandsDAP ManualsCaulk & SealantsSilicone Max 2.8 oz. Clear 100% Premium Kitchen and Bath Silicone Sealant (12-Pack)

3/3/2019

DAP

SILICONE MAX

™

Premium Kitchen,

Bath & Plumbing 100% Silicone Sealant

DAP

SILICONE MAX

™

PREMIUM KITCHEN, BATH & PLUMBING 100% SILICONE SEALANT provides

20 year mold and mildew resistance. It won’t crack or shrink, providing a durable, 100% waterproof seal.

DAP SILICONE MAX is water ready in just 30 minutes. Once cured, it is safe for incidental food contact.

Ideal for a wide variety of kitchen and bath applications such as sealing around sinks, tubs, showers, back

splashes, countertops and fixtures. Sealant backed by a Lifetime Guarantee. Interior use.

 20 year mold & mildew resistance

 Maximum flexibility

 30 minute water ready

 100% waterproof

 Shrink and crack proof

 Certified by NSF to NSF / ANSI Standard #51

 Safe for incidental food contact. When cured and washed, the product meets the requirements of

FDA Regulation No. 21 CFR 177.2600.

 Interior use

 Lifetime Guarantee

PACKAGING COLOR UPC

2.8 fl oz (82.8 mL) White 7079808795

2.8 fl oz (82.8 mL) Clear 7079808794

10.1 fl oz (300 mL)

White 7079808667

10.1 fl oz (300 mL)

Clear 7079808668

10.1 fl oz (300 mL)

Almond 7079808793

PRODUCT DESCRIPTION

KEY FEATURES & BENEFITS

Summary of content (4 pages)

PAGE 1
DAP® SILICONE MAX™ Premium Kitchen, Bath & Plumbing 100% Silicone Sealant PRODUCT DESCRIPTION DAP® SILICONE MAX™ PREMIUM KITCHEN, BATH & PLUMBING 100% SILICONE SEALANT provides 20 year mold and mildew resistance. It won’t crack or shrink, providing a durable, 100% waterproof seal. DAP SILICONE MAX is water ready in just 30 minutes. Once cured, it is safe for incidental food contact.
PAGE 2
SUGGESTED USES USE FOR CAULKING AND SEALING:  Showers   Tubs   Sinks  Countertops Backsplashes Pipes    Vents Fixtures Repairing loose tile ADHERES TO:  Ceramic  Porcelain  Glass  Cultured marble Vinyl Most plastics Most rubbers Most metals*     Fiberglass Wood – non-oily Drywall Plaster     FOR BEST RESULTS         Application temperature range is between -35°F and 140°F. Joint width should not exceed ½”. If joint depth exceeds ½”, use foam backer rod.
PAGE 3
2. If using cartridge, cut nozzle at a 45° angle to desired bead size. Puncture inner foil seal. Load into caulk gun. 3. Fill gap or crack with sealant. 4. If necessary, tool or smooth the bead of sealant with a finishing tool before the sealant skins over. 5. At 73°F & 50% relative humidity, sealant is water resistant at 30 minutes & reaches full cure in 24 hours. Low humidity may slow cure. 6. Clean up excess uncured sealant from surface and tools with mineral spirits.
PAGE 4
Water Ready Time 30 minutes Paint Ready Time Not paintable Mildew Resistance 20 year mold & mildew resistance guarantee CLEAN UP & STORAGE Remove excess uncured sealant from surfaces and tools with mineral spirits. Excess cured sealant must be cut or scraped away. Do not use mineral spirits to clean hands or skin. Wash hands or skin with soap and water. Store container in temperatures below 80ºF and in a dry place. SAFETY See product label or Safety Data Sheet (SDS) for health and safety information.