MSDS

SDS Number: 00010401001 Revision Date: 5/14/2015
11. Toxicological Information
EFFECT OF OVEREXPOSURE - INHALATION: Inhalation may cause mild irritation to the respiratory tract (nose, mouth, mucous
membranes). Prolonged, repeated, or high exposures may cause irritation to the respiratory tract (nose, mouth, mucous membranes).
EFFECT OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated contact with skin may cause mild irritation.
EFFECT OF OVEREXPOSURE - EYE CONTACT: Not expected to cause eye problems under normal use conditions. Direct eye
contact may cause irritation.
EFFECT OF OVEREXPOSURE - INGESTION: Single dose oral toxicity is low. Amounts ingested incidental to industrial handling are
not likely to cause injury; however, ingestion of large amounts may cause injury. Ingestion of large amounts may cause nausea,
gastrointestinal upset, and pain. May cause liver and kidney damage, and central nervous system depression.
CARCINOGENICITY: No Information
PRIMARY ROUTE(S) OF ENTRY: Eye Contact, Skin Contact
Acute Toxicity Values
The acute effects of this product have not been tested. Data on individual components are tabulated below
CAS-No.
Chemical Name Oral LD50 Dermal LD50 Vapor LC50
1317-65-3 Limestone 6450 mg/kg Rat >2000 mg/kg >20 mg/L
8001-22-7 Soya oil >16500 mg/kg Rat >2000 mg/kg >20 mg/L
14807-96-6 Talc (non-asbestiform) N.I. N.I. N.I.
64741-88-4 Petroleum distillates >5000 mg/kg Rat >2000 mg/kg Rabbit 2.18 mg/L Rat
14808-60-7 Quartz 500 mg/kg Rat >2000 mg/kg >20 mg/L
13463-67-7 Titanium dioxide >10000 mg/kg Rat >5000 mg/kg Rabbit >20 mg/L
N.I. = No Information
12. Ecological Information
ECOLOGICAL INFORMATION: Ecological injuries are not known or expected under normal use.
13. Disposal Information
DISPOSAL METHOD: This product does not meet the definition of a hazardous waste according to U.S. EPA Hazardous Waste
Management Regulation, 40 CFR Section 261. Dispose as hazardous waste according to all local, state, federal and provincial
regulations. State and Local regulations/restrictions are complex and may differ from Federal regulations. Responsibility for proper
waste disposal is with the owner of the waste.
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: In case of spillage, absorb with inert material and dispose of in
accordance with applicable regulations. Use absorbent material or scrape up dried material and place in container.
14. Transport Information
SPECIAL TRANSPORT PRECAUTIONS: No Information
DOT Proper Shipping Name: Not Regulated.
DOT Technical Name: N.A. Hazard SubClass: N.A.
DOT Hazard Class: N.A. DOT UN/NA Number: N.A.
Packing Group: N.A.
Page 4 / 6