Use and Care Manual

ManualsBrandsDAP ManualsPaintFast'N Final 32 oz. White Lightweight Spackling (6-Pack)

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 3/15/13

DAP



FAST ‘N FINAL

Lightweight Spackling

 Patch & prime in one step

 Microsphere Technology – Provides ultra smooth surface for painting & hiding of repair

 Fast drying – paint in minutes

 Won’t shrink/crack

 No sanding

 Easy one strike application

 Interior/exterior

 Low VOC (Per CA Air Resource Board Test Method 310)

 Low odor

Packaging: 8 FL. OZ., 16 FL. OZ., 32 FL. OZ., 1 Gallon

Color: Off White

UPC Numbers: 70798 12140, 12148, 12145, 12146, 1214, 12147, 12142, 12143, 23030, 23050,

71354, 23090

Company Identification:

Manufacturer: DAP Products Inc., 2400 Boston Street, Baltimore, Maryland 21224

Usage Information: DAP HELPLINE: 1-888-DAP-TIPS or www.dap.com and click on “Ask the Expert”

Order Information: 800-327-3339

Fax Number: 410-558-1068

Also, visit the DAP website at dap.com

Product Description:

DAP

FAST ‘N FINAL

Lightweight Spackling lets you patch and prime in one easy step, saving time

and money. It dries fast with no need to sand or prime, letting you paint in minutes. It is easy to apply with

one strike of the putty knife. The advanced, lightweight formula with Microsphere Technology provides an

ultra smooth surface for exceptional hiding of the repair once painted. Won’t crack or shrink. Ideal for

repairing holes, cracks and dents in drywall, plaster, wood and stucco. DAP

FAST ‘N FINAL

Lightweight Spackling has a low VOC content (per CA Air Resources Board Test Method 310) and is low

in odor. Interior/exterior use.

Suggested Uses:

Ideal for filling holes, cracks, crevices, dents or defects in:

 Drywall

 Wood

 Plaster

 Stucco

Summary of content (3 pages)

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 3/15/13 DAP FAST ‘N FINAL® Lightweight Spackling          Patch & prime in one step Microsphere Technology – Provides ultra smooth surface for painting & hiding of repair Fast drying – paint in minutes Won’t shrink/crack No sanding Easy one strike application Interior/exterior Low VOC (Per CA Air Resource Board Test Method 310) Low odor Packaging: Color: UPC Numbers: 8 FL.
PAGE 2
Surface Preparation & Application:  Surface must be clean, dry and free of foreign material.  Mix gently before use.  Using a clean putty knife, press spackling into hole or crack. Draw blade firmly across the surface to remove excess material in one strike.  For a smoother finish, dip putty knife into water and lightly smooth spackling.  One coat should be sufficient for small repairs  May be painted within minutes with a latex paint. Please follow paint manufacturer’s instructions for application.
PAGE 3
thoroughly after handling. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. FIRST AID: SKIN: Wash thoroughly. EYE: Immediately flood with large quantities of water. INHALATION: Remove to fresh air. INGESTION: DO NOT INDUCE VOMITING. Get medical attention if complications arise from any exposure. For emergencies, call your poison control center at 1‐800‐222‐1222.