Use and Care Manual

For Best Results:
• Do not apply when temperatures are below 50°F.
• Do not apply outside if rain is expected within 24 hours.
• Do not use on floors or as a caulk, sealant or joint filler over cracks and joints where expansion and
contraction may occur.
• DO NOT USE AS A SKIM COAT.
• For exterior applications, always topcoat with a good quality exterior grade paint.
• If a textured finish is desired, add clean sand to spackling compound prior to application.
• Do not use for tuck pointing applications on brick
• For larger areas to be patched on bare concrete, use a latex fortified Portland cement-based dry mix.
Physical & Chemical Characteristics:
Consistency: Paste
Vehicle: Acrylic Polymer
Volatile: Water
Filler: Inert Filler
Odor: Slight Acrylic
Weight/Gallon: 15.6 ± .2 pounds
Solids: 77 ± 2% by weight
Application Temperature: 50° F Minimum
Service Temperature: 0ºF to 150ºF
Shelf Life: 1 Year
Freezing: Freeze/Thaw Stable 5 Cycles at 0ºF
Drying Time: 1 to 5 hours depending on temperature, relative humidity and depth of fill.
Painting: Takes either oil or latex-base paint
MSDS No.: 00010420001
Clean Up:
Wash tools immediately after use with water. Be sure container lid is closed and tightly sealed. Store in a cool,
dry place.
Safety:
See product label and Material Safety Data Sheet (MSDS) for safety information. You can request an MSDS
by visiting our website at
www.dap.com or by calling 888-DAP-TIPS.
Satisfaction Guaranteed:
If you are not satisfied with this product’s performance when used as directed, return used container and sales
receipt to DAP Inc., Technical Customer Service, 2400 Boston Street, Suite 200, Baltimore, MD 21224 for
product replacement or sales price refund. DAP will not be liable for incidental or consequential damages.
2