Use and Care Manual

Surface Preparation & Application:

1. Surface must be clean, dry and free of all old caulk, dirt, dust and grease. Rubbing alcohol is

recommended for removing soap film and soil.

2. Remove cap if using the tube. Cut nozzle at 45° angle to desired bead size. Load cartridge into caulking

gun if using the 10.1 oz cartridge. Joint gap should not exceed 3/8”. If joint depth exceeds 3/8”, use

backer rod material.

3. Fill gap with caulk, pushing caulk ahead of nozzle.

4. For a neat finish, smooth bead of caulk with finishing tool.

5. Clean up excess uncured caulk with a damp cloth before it skins over (15 minutes). Excess cured caulk

must be cut or scraped away.

6. Reseal tube/cartridge for future use.

For Best Results:

• Apply in temperatures above 40°F.

• Not for continuous underwater use. Do not apply product under shower door track or in closed

applications.

• Allow caulk to dry at least 2 hours (longer in cool or humid conditions) before painting with latex or oil-

based paints.

• Allow to dry and fully cure for at least 36 hours before exposing to water and moisture.

• Store caulk away from extreme heat or cold.

Physical & Chemical Characteristics:

Tooling Time: 10 Minutes

Tack Free Time: 15 Minutes

Paintability: Yes

Odor: Very Mild

Consistency: Smooth and Creamy

Vehicle: Latex Polymer

Volatile: Water

Flash Point: None

Filler: Calcium Carbonate

Solids: White/Colors: 68 ± 1% by weight

Weight per Gallon: 11.81 ± .05 lbs.

Temperature Service Range: -20ºF to 150ºF

Temperature Application Range: 40°F to 100°F

Freeze Thaw Stability: Passes 5 Cycles 0ºF

Applications: Interior

Shelf Life: 12 months

Coverage: 5.5 fluid ounces: 30 linear ft. at a 3/16" diameter bead or 2 bathtubs

10.1 fluid ounces: 55 linear ft. at 3/16” diameter bead or 4 bathtubs

MSDS No: 00010009001

Clean Up:

Clean up excess caulk with a damp cloth before it skins over (15 minutes). Dried material must be cut or

scraped away.

Safety:

See product label or Material Safety Data Sheet (MSDS) for safety information. You can request an MSDS by

calling 888-DAP-TIPS or by visiting our website at dap.com.