Use and Care Manual

ManualsBrandsDAP ManualsCaulkDYNAFLEX ULTRA BLACK 10.1 OZ. ADVANCED EXTERIOR WINDOW, DOOR, AND SIDING SEALANT (12-Pack)

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 7/31/17

DAP

DYNAFLEX ULTRA

™

Advanced Exterior

Window, Door & Siding Sealant – White & Colors

• Formulated with innovative Weather Max™ Technology for All Weather Protection

• Resists UV fading, yellowing & dirt pick-up

• Won’t crack, crumble, chalk, bubble or break down

• Lifetime mold, mildew & algae resistance guarantee

• Sealant stays looking clean & new

• 1 hour rain & paint ready

• 100% waterproof & weatherproof seal

• Permanently flexible

• Strong adhesion to wide variety of common building materials

• Easy water clean-up & low odor

• Meets ASTM C920, Type S, Grade NS, Class 35

• Exterior/interior use

Packaging: 10.1 fluid ounces (300 mL)

Colors & UPC Numbers: White: 0 70798 18211 0

Beige: 0 70798 18213 4

Clay: 0 70798 18214 1

Iron Gray: 0 70798 18215 8

Dark Bronze: 0 70798 18216 5

Company Identification:

Manufacturer: DAP Products Inc., 2400 Boston St., Baltimore, Maryland 21224

Usage Information: Call 1-888-DAP-TIPS or visit dap.com & click on “Ask the Expert”

Order Information: 800-327-3339

Fax Number: 410-558-1068

Also, visit the DAP website at www.dap.com

Product Description:

DAP

DYNAFLEX ULTRA™ Advanced Sealant for Window, Door, Siding & Trim applications is

formulated with innovative Weather Max™ Technology to resist UV fading, chalking, crumbling, cracking and

dirt build up. It also has a lifetime mold, mildew and algae resistance guarantee, so the sealant stays looking

clean and new. DYNAFLEX ULTRA has strong adhesion to common building materials and stays

permanently flexible for a long-lasting, weatherproof seal that provides All Weather Protection and stands up to

the elements. It is rain ready and paintable in only one hour for better productivity. Does not bubble. The sealant

guns out effortlessly and tools smoothly for easy application. Low in odor and easy water clean-up.

Exterior/interior use. Meets ASTM C920, Type S, Grade NS, Class 35.

Summary of content (4 pages)

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 7/31/17 DAP® DYNAFLEX ULTRA™ Advanced Exterior Window, Door & Siding Sealant – White & Colors • • • • • • • • • • • • Formulated with innovative Weather Max™ Technology for All Weather Protection Resists UV fading, yellowing & dirt pick-up Won’t crack, crumble, chalk, bubble or break down Lifetime mold, mildew & algae resistance guarantee Sealant stays looking clean & new 1 hour rain &
PAGE 2
Suggested Uses: Ideal for sealing for installation, weatherization & painting applications on: • Windows • Fascia • Doors • Flashing • Siding • Pipes/Vents • Trim Adheres To: • Fiber Cement • Vinyl • Aluminum • Metal • Glass • Composite & PVC trim board • Wood – Painted & Unpainted • • • • • Cedar Concrete & Masonry Brick & Stone Fiberglass Most plastics For Best Results: • Apply in temperatures above 40°F. • Not for continuous underwater use, high temperature surfaces or surface defects.
PAGE 3
Typical Physical & Chemical Characteristics: Consistency: Smooth and creamy, non-slumping paste Volatile: Water Flash Point: >212ºF Bubble Resistant: Yes Filler: Calcium carbonate Solids: 75% by weight Extrusion Rate: 20 - 30g/15 seconds Burrell Extrusion Vertical Sag: < .15 inches ASTM C2202 mod. 3/8” depth Weight per Gallon: 10.95 lbs.
PAGE 4
Clean Up & Storage: Remove excess uncured sealant with a damp cloth or sponge before it dries. After the sealant has dried/cured, excess cured sealant must be cut or scraped away. Store in a cool, dry place away from extreme heat or cold. Safety: See product label or Safety Data Sheet (SDS) for additional information. For an SDS, contact your supplier or visit dap.com.