Use and Care Manual

Volatile: Water

Flash Point: None

Density: 12.0lbs./gal. (100 L/kg)

Service Temperature Range: - 30ºF to 180ºF

Application Temperature Range: 40ºF to 100ºF

Typical Physical & Chemical Characteristics (Continued):

Consistency: Smooth and creamy

Odor: Very mild

Tooling Time: 10 minutes

Tack Free Time: 30 minutes

Tensile Strength: 200 psi

Elongation: 300%

Dynamic Joint Movement: ± 25%

Paintable: Yes

Freeze Thaw Stability: Passes 5 Cycles 0ºF (- 17.78 °C)

Shelf Life: 12 months

Coverage: 5.5 fluid ounces: 30 linear ft. at a 3/16" diameter bead

10.1 fluid ounces 55 linear ft. at a 3/16" diameter bead size

SDS No: 00010001001

Clean-Up & Storage:

Clean up excess uncured sealant with a damp cloth or sponge before it skins over. Wash hands and tools with

warm water and soap. Cured sealant must be cut or scraped away. Store in a cool, dry place away from extreme

heat or cold.

Safety:

Caution! Contains ethylene glycol. Use in well-ventilated area. Do not get in eye or on skin. Use gloves and

safety glasses. Keep out of reach of children. Do not take internally. Warning: This product contains

chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. In an

emergency, call your poison control center at 1(800)222-1222. See product label and Safety Data Sheet (SDS)

for additional safety information. You can request and SDS by visiting dap.com or by calling 1-888-DAP-TIPS.

Lifetime Guarantee:

DAP warrants this product for sealant purposes during the lifetime of your home when applied within one year

of purchase and as directed. If product fails to perform when used as directed, return container and sales receipt

to DAP Products Inc., TCS, 2400 Boston St., Baltimore, MD 21224 for replacement product or sales price

refund. DAP will not be liable for incidental or consequential damages.