Use and Care Manual

ManualsBrandsDAP ManualsCaulkDAP 3.0 9 oz. Crystal Clear Premium Gutter and Flashing Sealant (12-Pack)

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 1/25/16

DAP

3.0

™

High Performance Concrete & Mortar Sealant

 Self-leveling, no tooling required

 1 hour water and paint ready

 100% waterproof & weatherproof

 Extreme temperature use: 20F to 120F

 Superior flexibility & adhesion

 Shrink & crack proof

 Low odor

 Lifetime guarantee

 Meets ASTM C920, Class 25

 Exterior/interior

Packaging: 9.0 fl. oz. (266 mL)

Color: Gray

UPC Number: 70798 18370, 70798 07059

Company Identification:

Manufacturer: DAP Products Inc., 2400 Boston St., Suite 200, Baltimore, Maryland 21224

Usage Information: Call 1-888-DAP-TIPS or visit dap.com & click on "Ask the Expert"

Order Information: 800-327-3339

Fax Number: 410-558-1068

Also, visit the DAP website at www.dap.com

Product Description:

DAP

3.0

™

HIGH PERFORMANCE CONCRETE & MORTAR SEALANT is ideal for filling cracks

and gaps in horizontal concrete surfaces such as driveways, patios, sidewalks, and steps. The self-leveling

formula requires no tooling. It withstands foot and vehicle traffic after fully cured. It is paint and water ready in

1 hour. It won’t crack or shrink and provides excellent adhesion and flexibility for a 100% waterproof and

weatherproof seal. It is paintable, low odor and VOC compliant. Backed by a lifetime guarantee. Meets ASTM

C920, Class 25. Exterior/interior use.

Suggested Uses:

Summary of content (6 pages)

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 1/25/16 ® DAP 3.0™ High Performance Concrete & Mortar Sealant           Self-leveling, no tooling required 1 hour water and paint ready 100% waterproof & weatherproof Extreme temperature use: 20F to 120F Superior flexibility & adhesion Shrink & crack proof Low odor Lifetime guarantee Meets ASTM C920, Class 25 Exterior/interior Packaging: Color: UPC Number: 9.0 fl. oz.
PAGE 2
Ideal for sealing horizontal cracks, gaps, and holes in:  Concrete driveways  Steps  Sidewalks  Garages  Above ground foundations  Other concrete surfaces
PAGE 3
Adheres to:  Concrete  Mortar  Brick  Wood  Other construction material  Masonry  Stone
PAGE 4
PAGE 5
Performance Characteristics:  Accelerated cure time allows exposure to water after only 1 hour without washing out.  100% waterproof and weatherproof  Extreme temperature use: 20F to 120F.  Cured sealant is mold and mildew resistant.  Won’t crack or shrink.  Paintable with most acrylic latex paints after 1hour. Use acrylic primer for oil-based paints.  Sealant reaches full cure in 24 hours. Restrain or limit any traffic until then.  Meets ASTM C920, Class 25. Surface Preparation & Application: 1.
PAGE 6
Clean Up & Storage: Before curing, remove excess material from surface and tools with mineral spirits. After product has cured, excess material must be cut or scraped away. Clean hands with soap and water. Store product below 80°F away from extreme heat or moisture. Safety: Contains phthalate esters & trimethoxyvinylsilane. During application & cure, methanol is released. Use only with adequate ventilation. Avoid breathing vapors. Ensure fresh air entry during application & drying.