Use and Care Manual

ManualsBrandsDAP ManualsPaintPlastic Wood 3.7 oz. Dark Walnut Wood Putty (6-Pack)

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 3/7/14

DAP

PLASTIC WOOD

Wood Putty

• Non-hardening wood putty that quickly repairs holes and minor defects after assembly and finishing

to achieve a polished, finished look

• Hides countersunk nail holes, gouges, scratches & mitre joints

• Colors can be blended for custom color matching

• Interior use

Packaging: Net Weight 3.7 oz. ( g)

Colors: White, Natural Oak, Light Oak, Natural Pine, Red Oak, Light Walnut, Dark Walnut,

Red Mahogany, Maple, Cherry, Ebony, Pickled Oak

UPC Numbers: 70798 21245, 70798 21247, 70798 21250, 70798 21251, 70798 21255,

70798 21262, 70798 21266, 70798 21268, 70798 21270, 70798 21272, 70798 21276,

70798 21274

Company Identification:

Manufactured for: DAP Products Inc., 2400 Boston Street, Baltimore, Maryland 21224

Usage Information: Call 1-888-DAP-TIPS or visit www.dap.com and click on “Ask the Expert”

Order Information: 800-327-3339

Fax Number: 410-558-1068

Also, visit the DAP website at dap.com

Product Description:

DAP







PLASTIC WOOD

Wood Putty is an easy-to-use, non-hardening wood putty that quickly repairs holes

and minor defects in interior surfaces after assembly and finishing. Recommended for filling and hiding

countersunk nail holes, gouges, scratches and mitre joints. Colors can be blended for custom color matching.

Interior use only. Non-paintable.

Suggested Uses:

Ideal for quick repairs of minor scratches, gouges, nail holes and other minor imperfections on interior

surfaces such as:

• Baseboards

• Paneling

• Cabinetry

• Woodwork

• Molding

• Furniture

• Windows/Doors

• Mitre joints

• Other wood surfaces

Surface Preparation & Application:

1. Surface to be filled must be clean and dry. Surface, wood putty and air temperature should be 40°F or

higher.

2. Stain, seal or topcoat surface before applying wood putty. Product cannot be painted, stained or coated.

3. Press DAP



PLASTIC WOOD

Wood Putty firmly into nail holes or other imperfections.

4. Avoid excess contact with surrounding area. Wipe excess from surrounding area with a cloth, rag or towel.

5. Wood Putty will not harden to a sandable surface

Summary of content (2 pages)

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 3/7/14 DAP® PLASTIC WOOD® Wood Putty • • • • Non-hardening wood putty that quickly repairs holes and minor defects after assembly and finishing to achieve a polished, finished look Hides countersunk nail holes, gouges, scratches & mitre joints Colors can be blended for custom color matching Interior use Packaging: Colors: UPC Numbers: Net Weight 3.7 oz.
PAGE 2
6. 7. Most repairs require just one fill. Deep holes may require more than one application. Colors can be blended for custom matches. Test color match on scrap or inconspicuous area prior to application. For Best Results: • This product is designed to be applied as a final finish. • This product is not stainable, sandable or paintable.