Use and Care Manual

2
6. Most repairs require just one fill. Deep holes may require more than one application.
7. Colors can be blended for custom matches. Test color match on scrap or inconspicuous area prior to
ap
plication.
For Best Results:
• This product is designed to be applied as a final finish.
• This product is not stainable, sandable or paintable.
Typical Physical & Chemical Characteristics:
Consistency: Knife Grade Putty
Vehicle: Blend of vegetable and mineral oils
Volatile: Aliphatic Hydrocarbons
Filler: Inorganic fillers and color pigments
Weight Per Gallon: 18.1 ± 0.2 lbs.
Odor: Mild, pleasant
Solids: 98.8 ± 0.7%
Application Temperature Range: 40°F Minimum
Time to Skin: 24 to 36 hours
Shelf Life: 12 months
MSDS No.: 00077064001
Clean Up & Storage:
Clean tools immediately after use with mineral spirits. Do not use mineral spirits to clean skin. Dried putty
must be cut or scraped away. Be sure container lid is closed and tightly sealed. Store in a cool, dry place away
from extreme heat or cold.
Safety:
WARNING: This product contains chemicals known to the State of California to cause cancer. May irritate
skin. Wear gloves. Wash skin with soap and water. Do not take internally. KEEP OUT OF REACH OF
CHILDREN. Get medical attention if complications arise from any exposure. For emergencies, call your
poison control center at 1-800-222-1222. See product label and Safety Data Sheet (SDS) for additional safety
information. You can request an SDS sheet by visiting our website at www.dap.com or calling 1-888-DAP-
TIPS.
Limited Warranty:
DAP will not accept liability for more than replacement product or sales price refund.