Use and Care Manual

Technical Data Bulletin

DRYWALL

Construction Adhesive

DAP® DYNAGRIP® DRYWALL construction adhesive is a premium

grade adhesive specifically formulated for drywall installation. This VOC

compliant, instant grab adhesive prevents nail pops and helps limit air

and sound movement between walls. DYNAGRIP® DRYWALL is an

easy to gun adhesive that delivers a strong permanent bond.

• Drywall & Interior Paneling

Installation

• Dimensional Lumber

• Drywall

• Masonry

• Metal

• OSB

• Paneling

• Plywood

• Wood

• Bonding two non-porous materials

• Constant water exposure

• Exterior use

• Flooring applications

• Mirror installation

• Subfloor or deck installation

• Applications other than drywall &

paneling installation

Recommended For:

Adheres To:

Not Recommended For:

DAP Products, Inc.

2400 Boston Street, Suite 200

Baltimore, MD 21224

Phone: 410-675-2100

REV: 11/01/2016

SKU # SIZE

7079827518 28oz

PAGE 1
Technical Data Bulletin DRYWALL Construction Adhesive DAP® DYNAGRIP® DRYWALL construction adhesive is a premium grade adhesive specifically formulated for drywall installation. This VOC compliant, instant grab adhesive prevents nail pops and helps limit air and sound movement between walls. DYNAGRIP® DRYWALL is an easy to gun adhesive that delivers a strong permanent bond.
PAGE 2
DRYWALL Product Features •Exceeds ASTM C557 •Easy Water Clean Up •Low Odor •VOC Compliant Directions FOR BEST RESULTS: Apply in temperatures above 40°F. Keep adhesive above 40°F for easier gunning. One surface must be porous. Store away from extreme heat or cold. INSTRUCTIONS: 1. Surfaces must be clean, structurally sound, and free of debris. 2. Pre-cut and fit materials before applying adhesive. 3. Trim nozzle to desired bead size. ¼” recommended for most applications. 4. Puncture inner foil seal. 5.