Use and Care Manual

Technical Data Bulletin

TUB SURROUND

Construction Adhesive

DAP® DYNAGRIP® TUB SURROUND construction adhesive is a

premium grade, high strength adhesive specifically formulated for tub

surround installation. This premium adhesive is safe for use on all tub

surround materials and dries clear for an ideal finish. DYNAGRIP® TUB

SURROUND is an instant grab adhesive that is moisture, steam, water,

and heat resistance once fully cured.

• Tub Surround Installation

• Shower Wall Enclosures

• ABS Tub Surrounds

• Acrylic Tub Surrounds

• Cement Backerboard

• Ceramic Tiles

• Dimensional Lumber

• Drywall

• Fiberglass Tub

Surrounds

• Foamback Tub

Surrounds

• Greenboard

• OSB

• Plywood

• PVC Tub Surrounds

• Mirror installation

• Bonding two non-porous materials

• Applications other than tub surround

& water enclosure installation

Recommended For:

Adheres To:

Not Recommended For:

DAP Products, Inc.

2400 Boston Street, Suite 200

Baltimore, MD 21224

Phone: 410-675-2100

REV: 11/01/2016

SKU # SIZE

7079827521 10.3oz

PAGE 1
Technical Data Bulletin TUB SURROUND Construction Adhesive DAP® DYNAGRIP® TUB SURROUND construction adhesive is a premium grade, high strength adhesive specifically formulated for tub surround installation. This premium adhesive is safe for use on all tub surround materials and dries clear for an ideal finish. DYNAGRIP® TUB SURROUND is an instant grab adhesive that is moisture, steam, water, and heat resistance once fully cured.
PAGE 2
TUB SURROUND Product Features •Won’t Etch Or Burn Tub Surround Material •Instant Grab •Easy Water Clean Up •VOC Compliant Directions FOR BEST RESULTS: Apply in temperatures above 40°F. Keep adhesive above 40°F for easier gunning. One surface must be porous. Store away from extreme heat or cold. INSTRUCTIONS: 1. Surfaces must be clean, structurally sound, and free of debris. 2. Pre-cut and fit materials before applying adhesive. 3. Trim nozzle to desired bead size. ¼” recommended for most applications. 4.