TDS

1/13/2023

DAP

2in1 Wall & Ceiling Spray Texture:

Orange Peel Water Based

DAP

2in1 Wall & Ceiling Spray Texture Orange Peel Water Based is an innovative technology system

that allows you to tackle wall, ceiling & hard to reach areas with just one can. DAP’s Aim Tech adjustable

nozzle can be easily rotated upwards to spray at almost any angle achieving maximum coverage. Its

ergonomic system provides professional hopper results and ultimate spray control. The aerosol can is

extremely easy to use, offers a wide fan for even coverage without excessive dripping or clogging. Proven

to create a seamless blend with existing textured surfaces by adjusting the texture size to your desired

finish. Fast dry time of 30 minutes. Superior paintability; no priming needed and won’t soften or drag.

Interior/Exterior.

• Ideal for vertical, overhead and hard to reach areas

• Wide coverage with even spray application

• Excellent match to textured surfaces

• 30 minute paint ready time depending on temperature, humidity & amount applied

• Strong and durable cure

• Low odor

• Easy water clean-up

USE FOR REPAIRING TEXTURED SURFACES:

• Drywall

• Stucco

• Plaster

PACKAGING

COLOR

UPC

25 oz can

White

7079850005

PRODUCT DESCRIPTION

KEY FEATURES & BENEFITS

SUGGESTED USES

PAGE 1
DAP® 2in1 Wall & Ceiling Spray Texture: Orange Peel Water Based PRODUCT DESCRIPTION ® DAP 2in1 Wall & Ceiling Spray Texture Orange Peel Water Based is an innovative technology system that allows you to tackle wall, ceiling & hard to reach areas with just one can. DAP’s Aim Tech adjustable nozzle can be easily rotated upwards to spray at almost any angle achieving maximum coverage. Its ergonomic system provides professional hopper results and ultimate spray control.
PAGE 2
FOR BEST RESULTS • • • • • • Shake well before spraying Apply in temperatures above 40F Spray using intermittent bursts Dispense a quick burst on scrap material to activate pressure Practice applying on scrap material before use Store away from direct heat in temperatures ranging from 40F to 90F APPLICATION Surface Preparation Surface must be clean, dry, structurally sound and free of all foreign material.
PAGE 3
Density (lbs per gallon) 10.5 Odor Low odor Clean Up Water Shelf Life 12 months Coverage Fine: up to 130 sq. ft. Medium: up to 90 sq. ft. Heavy: up to 70 sq. ft. Typical Application Properties Application Temperature Range Best between 65ºF-80ºF Typical Cured Performance Properties Service Temperature Range Above 40º F CLEAN UP & STORAGE Uncured material can be cleaned up with water. Excess cured material can be scraped off or sanded down.