8 Zones Multiroom System ORDERCODE D2680
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio 8 Zones Multiroom System brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
DAP Audio DAP Audio 8 Zones Multiroom System Product Guide Warning........................................................................................................................................................................2 Return Procedure....................................................................................................................................................3 Safety-instructions...........................................................................................
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Never remove warning or informative labels from the unit. Never use anything to cover the ground contact. Do not insert objects into air vents. Do not connect this system to a dimmerpack. Do not switch the system on and off in short intervals, as this would reduce the system’s life. Do not open the device and do not modify the device. Do not open this device. Risk: hazardous radiation exposure. Only use system indoor, avoid contact with water or other liquids.
OPERATING DETERMINATIONS If this system is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes void. Any other operation may lead to dangers like short-circuit, burns, electric shock, etc. You endanger your own safety and the safety of others! Improper installation can cause serious damage to people and property ! Connection with the mains Connect the device to the mains with the power-plug.
Description of the device Features The 8 Zones Multiroom System is a professional high power Public Adress Amplifier: • Multi-room/ source distribution system • Audio and video signal distribution • Easy connection and mounting system • Master-slave link setup (10 units) • 19”Rack mount type (2HE size) Frontpanel Fig. 1 1. Power LED Indicates that the amplifier is turned on. 2. Zone 1-8 LED Indicates that the keypad is connected and active. 3. AC Power Switch This is the main Power switch.
Backpanel Fig. 2 8. Preamp Line Out (1-8) If an application requires more power than the built in zone poweramp (2x20W) can deliver, you can use the zone line outputs to connect an additional amplifier. 9. Zone Speaker Output (zone 1-8) Four pole terminal for connecting 2 speakers to a zone. Make sure that the minimum speaker load is 4 Ω. 10. Inter Data Loop You can loop up to 16 units giving you a maximum of 128 zones using this connector. Also see fig. 4. 11.
23. AC Inlet With Integrated Fuse Holder This connector is meant for the connection of the supplied main cord. Connect one end of the power cord to the connector, the other end to the mains, then turn on the Power Switch (11) to operate the unit. Note: Please make sure that the supply voltage matches the operation voltage before connecting the unit to mains. Replace the fuse only with a fuse of same specification (230V:T6.3A/ 115V: 12A).
2. DIP switch 6 can be used to switch the autobroadcast function On or Off. Dip switch 6 = 1 Pressing the Call switch on the frontpanel of the AVP-800P will generate a call even if a keypad is powered off. If a keypad is powered off the AVP-800 will automatically start up the keypad in call mode. Dip switch 6 = 0 Pressing the Call switch on the frontpanel of the AVP-800P will generate a call only for the keypads Which are powered on. If a keypad is powered off, it will remain powered off. 3.
Connecting Inputs Fig. 5 Connecting Outputs Speakers are connected using terminal connectors. See the examples below and following page. Fig. 6 Absolute minimum nominal load Impedance is 4 Ohm per channel to avoid damage to the amplifier. The total speaker power should be at least the power of the amplifier to avoid damage to the speakers.
Keypad Panel Features and Functions. Fig. 7 24. Function LED This LED lights if function mode is selected. In function mode you can select source 1-6 using the Up (29) and Down (28) buttons. 25. Volume LED This LED lights if volume mode is selected. In volume mode you can adjust the volume using the Up (29) and Down (28) buttons. 26. Select/ Call Button The select switch lets you select Volume, Function, Treble or Bass mode. The corresponding LED indicates the selected mode.
38. Video Gain Control Use to adjust the video output level of the keypad. Range 0 - +6dB. Keypad Installation Fig. 8 Remote Control Fig. 9 39. Mute Button Press to mute all zones. 40. Source +/Use these buttons to select the input source C1-C6. 41. Treble +/Use these buttons to adjust the Treble level. 42. Volume +/Use these buttons to adjust the Volume level. 43. Balance L/R Press to mute all zones. 44.
Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables. Maintenance The DAP Audio 8 Zones Multiroom System requires almost no maintenance. However, you should keep the unit clean.
Product Specifications Power supply: AC 115V-60Hz, 230V-50Hz Power consumption: 240 Watt Power connector: Schuko Output power: 8 zones 20 watt Output connector audio: terminal connector Keypad connector: RJ-45 (UTP cat-5) 6 stereo inputs (RCA) Keypad controls: Source, bass, treble, volume 4 camera inputs (RJ-45) 4 video inputs (RCA) Dimension Controller/ Amplifier: 485 x 425 x 88 mm (LxWxH) Dimension Keypad: 125 x 82mm (LxWxH) Design and product specifications are subject to change without prior notice.
2009 Dap Audio.