Product guide

12
4. Stop Playback
There are two ways to stop playback:
1. Press the Play/Pause button during playback to pause at that point.
2. Press the Cue button during playback to return to the cue point and enter pause condition.
Fig. 10
5. Pausing
• Press the Play/Pause button to switch between play and pause.
• The play indicator flashes when the pause mode is set.
• Playback resumes when the Play/Pause button is pressed again.
6. Setting a Cue Point
• Press the Play/Pause button to switch between play and pause.
• The play indicator flashes when the pause mode is set.
• Use the Folder/ Track encoder to go to your desired Cue point.
• Press the Play/Pause button again and your Cue point has been stored and the CD will continu.
7. Cueing
• "Cueing" is the action of preparing for playback.
• Press the Cue button, the player will enter Cue-Mode, the playback returns to cue point and enter
pause condition, the Cue indicator lights up and the Play indicator flashes. When Play/Pause button is
pressed, play starts from the cue point.
• When the track search operation is completed after using the Folder/ Track encoder, the player
automatically finds the position at which the sound starts and cues there (Auto Cue).
• If the Cue button is pressed after the search operation or the scanning operation, the playback returns
to the cue point and enters pause condition.
NOTE: During cue mode, if the Cue button is pressed and hold, playback will start from the cue point,
when the button is released, the player will return to the cue mode automatically, it allows you to check
the cue point.
8. Scanning (Fast forward/Fast backward)
• Scanning is a function for moving quickly forward or backward while pressing the Fast Forward or Fast
Backwards buttons.
• Press the Fast Forward or Fast Backwards button to start scanning. The disc moves rapidly forward or
backward and the sound is audible. The current scan point is indicated on the LCD.
9. Time Display
Press the Time button to select time display mode:
1. Elapsed time of a track.
2. Remaining time of a track.
10. Changing Pitch of the song
There are three tools available for matching the BPM of the track:
1. Use the Pitch slider to adjust the BPM.
2. Use the Pitch Bend buttons to change the BPM temporarily.
1) Pitch-Slider
• To adjust the BPM by sliding the pitch slider up or down, tap the Pitch button to select the desired
pitch bend (8%, 16% or 24%).
the Pitch adjustment function.
• Slide the Pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is +-24%.