Product guide

10
38. Channel 4 Gain
Channel 4 input level is determined by the Gain control. With the Gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
39. Channel 3 Gain
Channel 3 input level is determined by the Gain control. With the Gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
40. Channel 2 Gain
Channel 2 input level is determined by the Gain control. With the Gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
41. Channel 1 Gain
Channel 1 input level is determined by the Gain control. With the Gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
42. Channel 2 CD/PHONO Selector
Used to set the input level for the channel 2 Phono-Line Input (55) for either phono or line level.
43. Channel 1 CD/PHONO Selector
Used to set the input level for the channel 1 Phono-Line Input (56) for either phono or line level.
44. Mic 2 Combo Input
Depending on what’s most suitable in a given situation, you can use the Combo input at the front or the
rear. Both inputs are wired in parallel so you can even use them to link through.
45. Mic 1 Combo Input
Depending on what’s most suitable in a given situation, you can use the Combo input at the front or the
rear. Both inputs are wired in parallel so you can even use them to link through.
46. GND
Use to connect the ground wire of your turntable.
47. Record RCA Unbalanced Out
Use these to connect a recording device.
48. Booth RCA Unbalanced Out
Use these outputs to connect an amplifier with unbalanced inputs.
49. Master 3 XLR Balanced Out
Use these outputs to connect an amplifier with balanced inputs.
50. Master 2 RCA Unbalanced Out
Use these outputs to connect an amplifier with unbalanced inputs.
51. Master 3 XLR Balanced Out
Use these outputs to connect an amplifier with balanced inputs.
52. Master 1 RCA Unbalanced Out
Use these outputs to connect an amplifier with unbalanced inputs.
53. Channel 5 RCA Line Inputs
Use to connect a line level device. You can select one of two the Line inputs with the Line select
switch on the frontpanel.
54. Channel 4 RCA Line Inputs
Use to connect a line level device. You can select one of two the Line inputs with the Line select switch
on the frontpanel.