Product guide

11
55. Channel 3 RCA Line Inputs
Use to connect a line level device. You can select one of two the Line inputs with the Line select switch
on the frontpanel.
56. Channel 2 RCA Line/Phono-Line Inputs
Use the Line input to connect a line level device. Depending on the position of the Phono/Line selector
(37), you can connect either a line level device or a turntable to the Phono-Line input.
57. Channel 1 RCA Line/Phono-Line Inputs
Use the Line input to connect a line level device. Depending on the position of the Phono/Line selector
(38), you can connect either a line level device or a turntable to the Phono-Line input.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connection Cables
Take care of your cables, always holding them by the connectors and avoiding knots and twists when
coiling them: This gives the advantage of increasing their life and reliability.
Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges,
etc.) are caused entirely by using unsuitable or faulty cables.
Headphones Unbalanced mono Balanced mono Insert