Product guide

13
Troubleshooting
DAP Audio EM-7.3
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1. If the device does not operate properly, unplug the device.
2. Check power from the wall, all cables, connections, etc.
3. If all of the above appears to be O.K., plug the unit in again.
4. If nothing happens after 30 seconds, unplug the device.
5. Return the device to your DAP Audio dealer.
Product Specification
Power supply: AC 230V - 50 Hz
Power consumption: 1A
Inputs: 10 line, 2phono, 2 mic
Line: cinch unbalanced, 150mV/50K
Phono: cinch unbalanced, 2,6mV/51K
Mic: combo jack/XLR balanced, 1,5mV/1K
Outputs: 3 zones, 1 rec, 1 headphone
Zones: cinch, XLR balanced, 0,75/1,5V
Rec: cinch unbalanced, 0,75V
Headphone: stereo jack, 300mV
Frequency response: 20Hz - 20kHz
Total harmonic distortion: < 0,03%
Stereo seperation: > 45dB
Signal to noise ratio: mic 70dB, Phono 60dB, Line 78dB
Dimensions: 483 x 100 x 89 (LxWxH)
Weight: 2,9kg
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: [e-mail]