Specifications

2
13
5
4
1
1
GROUP 1 GROUP 2 GROUP 3 GROUP 4 MIX L MIX R
AUX 1
AUX 2 AUX 3 AUX 5 AUX 4 AUX 7 AUX 6
PFL CTRL
SOLO L SOLO R MIX-B L MIX-B R AUX 8
SA
MASTER
FADER
L
R
MAIN MIX
+4dB
MONO OUT
+4dB
2
3
1
2
3
1
STERE0 L INSERT
0dB
MASTER
FADER
SA
STERE0 L INSERT
0dB
STERE0 R INSERT
0dB
2
3
1
STERE0 L INSERT
0dB
MASTER
FADER
STERE0 L INSERT
0dB
6. MASTER SECTION
1. TO MIX SWITCH
When this switch is on , the signal of MIX-B will be sent to the
STEREO MIX L/R buses.
2. MIX-B CONTROL
This control adjust the MIX-B final level of the combined signals
from all channels and send them to the MIX-B output jacks.
3. STUDIO OUT CONTROL
This is a stereo level control for the studio.
This circuit monitors the left/right SOLO buses.
4. MIX L/R MUTE SWITCH
When this switch is off, the signal of MIX L/R will be sent to the
MIX L/R connectors. When this switch is on , the MIX L/R output
signal to MIX L/R connectors will be muted.
5. MIX L/R MASTER FADER
These 100-mm faders adjust the final level of the combined signals
from all channels and send them to the MIX L/R output jacks. The
MIX L/R level meters allow you to monitor the MIX L/R outputs.
Rated output(Nominal) level is achieved with the fader set at“0”on
the scale.
GROUP 5
GROUP 6
GROUP 7 GROUP 8
8 BUS MIXING CONSOLE
15