CDMP-150 ORDERCODE D1152 Highlite International B.V.
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio CDMP-150 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
DAP Audio DAP Audio CDMP-150™ Product Guide Warning ........................................................................................................................................................................... 3 Unpacking Instructions ............................................................................................................................................. 3 Safety Instructions ...................................................................................................
Warning FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Do not insert objects into air vents. Do not connect this device to a dimmerpack. Do not switch the device on and off in short intervals, as this would reduce the system’s life. Do not open the device and do not modify the device. Only use system indoor, avoid contact with water or other liquids. Avoid flames and do not put close to flammable liquids or gases. Always disconnect power from the mains, when the system is not used. Only handle the powercord by the plug.
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the device.
Description of the device Features The CDMP-150 is a professional 1U CD/USB/MP3 player from DAP Audio.
Front Fig. 1 1. Power switch 2. Disc slot 3. Eject buton 4. LCD Display 5. Track select encoder 6. Rewind button 7. Fast forward button 8. Loop in button + LED 9. Out button 10. Reloop button 11. Pitch control 12. CD load LED 13. USB jack 14. CD/USB button 15. IR sensor 16. Cue button 17. Play/pause button 18. Repeat button 19. Single button 20. Time button 21. Pitch – button 22. Pitch button 23. Pitch + button Back Fig. 2 24. Phones level control 25. Phones output 26. Balanced line out L/R 27.
Remote control Fig. 2 29. Cursor left button 30. Cursor up button 31. Cursor right button 32. Power button 33. Repeat button 34. OK button 35. Time button 36. Cue button 37. Play/pause button 38. Rewind button 39. Pitch – button 40. Pitch button 41. Direct acces buttons 42. Eject buton 43. PGM button 44. Cursor down button 45. S/C button 46. Folder button 47. Fast forward button 48. Skip button 49. Pitch bend + button 50. Reloop button 51. Source button 52. Pitch + button 53. Loop in button 54.
Installation Remove all packing materials from the CD Player. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. The power supply is printed on the back of the device.
. Pitch control encoder Use this encoder to adjust the playback speed. Dial the control counterclockwise to slowdown the playback speed, dial the control to speedup the pklayback speed. 12. CD load LED This LED blinks while loading the CD. 13. USB port Use this port to connect a USB stick or an external hard disk. The USB port is only active when you’re in USB mode. Note: The CDMP-150 recognizes FAT and NTFS format up to a maximum capacity of 16 Gb, 99 folders and 999 files. 14/51.
25. Phones output You can connect a pair of headphones with an impedance of 32 - 600 Ohm to the headphones connector. It is a 6,3mm (1/4”) TRS socket, wired as Tip=left, Ring=right and sleeve = ground. 26. Balanced line out L/R XLR stereo line output. Use these outputs to connect to a mixer with balanced XLR inputs. 27. Unbalanced line out L/R RCA stereo line output. Use these outputs to connect to a mixer with unbalanced RCA inputs. 28.
Operations Loading a CD Hold the disc by the edges and push it gently in the disc slot (39). The Disc will now be loaded automatically. Unloading CD’s 1. The disc can't be ejected during playback. Stop the playback first. 2. Press the eject (3/42) button. The disc will be ejected. 3. If the movement of the disc stops, take the disc by the edges and remove it completely from the slot.
Scanning Fast forward • Forward Scanning is a function for moving quickly forwards while being in playback mode. • While pressing and holding the search (7/47) button for more than 1 second, the disc moves rapidly forward and the sound is audible. The current scan point is indicated on the LCD. Scanning Fast backwards • Backward Scanning is a function for moving quickly backwards while being in Playback mode.
Loop play 1. Push the loop in (8/53) button to set the loop start point, the LED beneath the loop in (8/53) button will light up, indicating that the start point is memorized. 2. Push the loop out (9/54) button to set the loop end point. The LED beneath the button will light up also. As soon as the end point is set, the playback will start loop play from start point to end point repeatedly. Both the LEDs beneath loop in (8/53) and loop out (9/54) buttons will light and LOOP will appear in the LCD display.
3. Areas that are affected by heat from indoor heaters, etc. Maintenance The DAP Audio-CD-Player CDMP-150 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth.
Product Specification Pitch: Pitch bend: Loop: S/N ratio: Freq response (-3dB): Compatible disks: USB files: USB format: Anti-shock buffer: Remote batteries: Power supply: Power consumption: Dimensions: Weight: 16% 16% Seamless 96 dB 20 – 20Khz CD, CDR, CDRW, Audio & Data (MP3 files) MP3, max 99 folder, 999 files FAT, NTFS max 16Gb 40 Sec 2x AAA (not included) 100-240V 50/60Hz 16W 483 x 225 x 44 (WxDxH) 2.9 Kg Design and product specifications are subject to change without prior notice. Website: www.
2013 Dap Audio.