Compact Array ORDERCODE D3710
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio Concert Series brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
DAP Audio DAP Audio Compact Array™ Product Guide Warning..…...................................................................................…………………………………………................. Safety-instructions………………………………………………………………………………………….….............. Operating Determinations……………………………………………………………………………………............ 2 2 3 Description..…..............................................................................……….…………………………………............... Features………………………………………………………………………………….………………….…..............
WARNING CAUTION! Keep this system away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this system have to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
Make sure that the available voltage is not higher than stated on the rear panel. Make sure that the power-cord is never crimped or damaged. Check the system and the powercord from time to time. The cable insert or the female part in the device must never be strained. There must always be sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly electrical shocks Always operate the unit with the AC ground wire connected to the electrical system ground.
The Compact array must never be fixed swinging freely in the room. The installation must always be secured with a safety attachment, e.g. an appropriate safety net or safety-cable. When rigging, derigging or servicing the Compact Array, always make sure, that the area below the installation place is blocked and staying in the area is forbidden. Description of the device Features The Dap Audio Compact Array is a two-way, line-array loudspeaker system intended for use in arrays of up to four enclosures.
Installation Remove all packing materials from the Compact Array. Check that all foam and plastic padding is removed. Set Up and Operation Signal Input Both Speakon input sockets are wired in parallel. And can be used as either input or for linking through to other Compact Arrays. The DAP Audio Compact Array is a flexible speaker systems that can be deployed in ground supported or suspended applications. The following information will help you set up your Compact Array system safely and effectively.
Single Compact Array. A single Compact Array may be used on a tripod Stand (DAP Audio D8409B) or on a pole (DAP Audio D8404) over its companion subwoofer (the DAP Audio (D3701). The use of a subwoofer is recommended for applications requiring more low-frequency power and extension. Usually, the array configuration Long/MidThrow switch should be set to the "Mid Throw" position if a single speaker is used. The Compact Array includes a dual angle 36mm pole Mount socket.
Locking Compact Array loudspeakers together. Any time two or more Compact Array speakers are locked together, they must be mechanically secured to each other using the internal rigging frame and supplied quick release pins. See Figure 4 below for details. Warning: Only use the correct quick release pins supplied by DAP Audio. Fig. 4 Suspension in permanent installations. For permanent installation a DAP Compact Array stack may be suspended by using the DAP D3715 Mounting Frame (separately available).
Installing the Array frame. 1. The array frame is attached to the internal rigging of the Compact Array using the included quick Release pins. Warning: Do not use any substitute for these pins. Place the entire frame on top of the Compact Array and flip up the drop levers (B) found on both sides of the speaker to be received by the mounting frame arms. Fig. 6 2.
Connection Cables Take care of the connector cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability, which is always to your advantage. Periodically check that your cables are in good condition, that they are correctly wired and that all their contacts are perfectly efficient: a great number of problems (faulty contacts, ground hum, discharges, etc.
Product Specifications Woofer: 1X SA-1275NHL High Driver: PA-44M Nominal impedance: 12Ω RMS Power Rating: 400W Program Power Rating: 800W Peak Power Rating: 1200W Input connector: Speakon NL4 Style Connector Full range: pin 1+ & 1Bi-amp: Low pin 1+ & 1-, High pin 2+ & 2Frequency response: 60 – 18.
2007 Dap Audio.