Product guide

4
Description of the device
Features
The PA100CD is an amplifier from DAP Audio.
• Full frequency response: 50Hz to 15,000 Hz at 3dB.
• Low distortion and noise level.
• 3 unbalanced microphone inputs
• 1 AUX and 1 LINE Out input
• Isolated transformer outputs complete with 4, 8, 16, 25V, 70V, 100V.
• Individual bass and treble tone controls
• Master volume control
• LINE OUT : Send Output for connecting a tape recorder or another amplifier.
• Built-in LED bar graph output level meter.
• Final stages completely protected thermal shut down and short protection.
• Output level LED indicator
• CD player with MP3
Overview
Fig. 1
1) CD Player with MP3
2) Master Volume Control: Adjust the overall gain of the amplifier.
3+4) Bass + Trebble : These are used to adjust equalization level for this amplifier. Turning the knobs in
clockwise direction will increase LOW (HIGH)-frequencies, turning the knobs in a
counter-clockwise direction will decrease LOW (HIGH)-frequencies.
5) AUX volume control: Adjust the Aux output volume level
6) Mic 1 volume control: Adjust the mic output volume level
7) Mic 1 Phone Jack: This MIC input jacks is a 6.3mm (1/4") unbalanced jack input, specifically designed for
a dynamic microphone.
8) Mic 2 volume control: Adjust the mic output volume level
9) Mic 2 Phone Jack: This MIC input jacks is a 6.3mm (1/4") unbalanced jack input, specifically designed
for a dynamic microphone.
10) Mic 3 volume control: Adjust the mic output volume level
11) Mic 3 Phone Jack: This MIC input jacks is a 6.3mm (1/4") unbalanced jack input, specifically designed
for a dynamic microphone.
12) Ouput Level meter: For proper operation of the amplifier keep the correct volume setting
13) AC Power On/Off
14) Power LED