Product guide

29
Product Specifications
Model: DAP Audio DCP-24
DSP:
Sample rate: 48 kHz, 64 bits NXP (Philips) DSP,
Inputs:
Input impedance: 10 kOhm balanced
Max input voltage: +22 dBu
Input dynamic range: 110 dB
Input selection: Any Input can be mixed to any output
Input Gain Control: -50 dB to +12 dB in 0,25 dB steps
EQ Sections on each Input and Output
EQ selections: Allpass, Bell, High Shelf, Low Shelf, Notch
Input EQ:
Type: 10-bands EQ.
EQ Selections: Allpass, Bell, High Shelf, Low Shelf, Notch
EQ Frequency Selection: 20 to 20.000 Hz in 1 Hz steps on all EQ’s
Allpass EQ: Q from 0.20 to 25 in 0,1 steps
Bell EQ (PEQ): Q from 0.20 to 25 in 0,1 steps
EQ gain form -12 dB to +12 dB in 0,25 dB steps
Low Shelf (SEQ): Shelf slope from 3 dB/oct to 25 dB/oct in 0,1 dB/oct steps
Low Shelf gain form -12 dB to +12 dB in 0,25 dB steps
High Shelf (SEQ): Shelf slope from 3 dB/oct to 25 dB/oct in 0,1 dB/oct steps
Low Shelf gain form -12 dB to +12 dB in 0,25 dB steps
Notch Filter: Q from 10 to 50 on 0,1 steps
Outputs:
Output Impedance: 100 Ohm balanced
Max output voltage: +9 dBu
Output Gain Control: -50 dB to +12 dB in 0,25 dB steps
Frequency Response: 20 – 20,000 Hz, (-0.1 dB)
Dynamic range: 114 dB
Output delay: Channel independent from 0 to 5 mS
Output delay steps: 21 µS steps from 0 to 5 mS
Output EQ:
Type: 10-bands EQ, same as Input EQ
Crossovers:
Types: Linkwitz Riley, Bessel and Butterworth
Slopes: 6, 12, 18, 24 dB/octave
Crossover frequencies: 20 to 20.000 Hz in 1 Hz octave steps
Crossovers available at Input and Output sections
Limiter:
Threshold points: -50 to +9 dBu in 0,25 dB steps
Attack time: Zero Attack Time Limiter
Release times: 1 = shortest, 100 = endless long, in steps of 1.