K-18BA ORDERCODE D3375
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio K-18BA brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
DAP Audio DAP Audio K-18BA™ Product Guide Warning..…...................................................................................………………………………………...................…...2 Safety-instructions………………………………………………………………………………………….…...................3 Operating Determinations……………………………………………………………………………………................ 4 Description..…..............................................................................……….………………………………….....................5 Features………………………………………………………………………………….………………….….....
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
WARNING CAUTION! Keep this system away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this system have to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
Prevent distortion! Make sure that all components connected to the K-18BA have sufficient power ratings. Otherwise distortion will be generated because the components are operated at their limits. Avoid ground loops! Always be sure to connect the power amps from the K-18BA cabinets and the mixing console to the same electrical circuit to ensure the same phase! If system is dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating.
Description of the device Features The K-18BA is a 18-inch high output processor controlled active subwoofer system designed at the DAP audio R&D department in the Netherlands. It can be used with other active fullrange-systems like the Kand P-active series to achieve more output and it features a new designed high precision 18-inch band pass cabinet which results in a relative small housing with "BIG" sound combined with the newest amplifier technology.
Overview Fig. 2 1) L- limit LED 2) R- limit LED 3) Power LED 4) Sub limit LED 5) Protect LED 6) Subwoofer level 7) Channel L High Pass output 8) Channel L level 9) Channel R High Pass output 10) Channel L Full range in 11) Channel R Full range in 12) Channel L Link out 13) Channel R Link out 14) Channel R level 15) Ground lift 16)Phase switch Fig.
Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Linking Satellites / Subwoofers Connect the cables coming from the mixer to the balanced INPUT sockets of the K-18BA. Depending on the mixer’s output sockets use either a jack or XLR cable. Link the units as shown in figure 4 on page 8.
Phase switch (16) This switch allows you to reverse the phase of the subwoofer if necessary. IEC power inlet and fuse (17) This connector is meant for the connection of the supplied main cord. Connect one end of the power cord to the connector, the other end to the mains, and then turn on the power switch (52) to operate the unit. Note: Please make sure that the supply voltage matches the operation voltage before connecting the unit to mains. Replace the fuse only with a fuse of same specification (T8A).
Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
Compensation of interference with balanced connections Maintenance The DAP Audio K-18BA requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the connectors with a damp cloth. Make sure connectors are thoroughly dry before linking equipment or supplying electric power.
Specifications 18” active 6th order bandpass subwoofer • Build in Limiter circuits • Build in Loudness circuits • Stereo XLR Inputs • Stereo Satellites Outputs With Limiters. • Woofer: PB-18100220HL, 8 Ohm, • Amplifier Output Power: 1000 Watt RMS • Crossover Frequency: 125 Hz, 24 dB/Oct • Freq. Response (-3 dB, -6 dB): 38 – 125 Hz • Freq.
2009 Dap Audio.