Soundmate Easy ORDERCODE D3215
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio Soundmate Easy brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
DAP Audio DAP Audio Soundmate Easy™ Product Guide Warning..…...................................................................................………………………………………….. Safety-instructions………………………………………………………………………………………….…. Operating Determinations……………………………………………………………………………………. 2 2 3 Description..…..............................................................................……….………………………………… Features………………………………………………………………………………….………………….…. Overview…………………………………………………………………………………………………..
WARNING CAUTION! Keep this system away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this system have to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • • • • • • • • • • • • • • • Make sure you don’t use the wrong kind of cables or defective cables. Make sure that the signals into the mixer are balanced, otherwise hum could be created. Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear. Make sure that there is sufficient room on all sides of the system for air circulation Make sure that the available voltage is not higher than stated on the rear panel.
Description of the device Features Soundmate Easy is a complete sound reinforcement solution consisting of: • 2 mid/high satellite speakers 6,5” 60 Watt / 4 Ohm • 1 active subwoofer 10” 150 watt / 4 Ohm, equipped with amplifier(s) and all the electronics required to run the system. • electronic circuitry has been fine tuned to match the speaker systems • 2 x 6 m Speakon – cable • 2 adjustable speakerstands • 1 carrying bag for speakerstands and cables • plug and play Overview Fig.
Fig. 2 9) Mic In: Balanced XLR Input jack to connect the microphone. (Pin 1 = Ground; 2= +; 3= - ) 10) Line In: Left/Right: Balanced XLR Input jack to connect the mixer. (Pin 1 = Ground; 2= +; 3= - ) 11) Aux-In: Input phone jack to connect a CD Player or DJ Mixer. 12) Aux-Out: Sends parallel full range signals out to additional systems or components. 13) Satellite Speaker Output (left/right): Speakon connector output for M/H satellite speakers.
Set Up and Operation Soundmate Easy is a 2 way active satellitesystem with one 10” 300 watt sub-woofer and two 6,5” 75 Watt mid/high units. The set comes complete with stands and 2 Speakon cables and is ready to use. The amplifier-section is build into the subwoofer and consists of 3 separate power-amplifiers. Further built-in are the crossovers, frequency response correction circuits, breaker circuitry. The SoundMate system can be used for small live gigs, events and less Mobile DJ’s.
Product Specifications Inputs Line IN L / R Connector XLR plug female Input design electronically balanced & floating Input impedance 48 k Outputs Parallel Out L / R Connector: XLR socket male Satellite Out L / R Connector: Speakon (pin 1+= +; pin 1--= --) Speaker Out: Speakon NL4 Style Connector Active Crossover Crossover freq.
Below are a few examples how to set up your Soundmate Easy: 8
2005 Dap Audio.
