Specifications

9
Clubmate III™
Ordercode: D3265
Set Up and Operation
The satellite
The Clubmate III satellite is designed to produce a mid/high spectrum of sound. The satellite is equipped
with a 12” LF loudspeaker and 1,75” HF driver with a horn with a dispersion of 60˚x40˚. The built-in amplifier
delivers 600W pure sound.
The subwoofer
Feel the bass with this 15” basscabinet. The cabinet is powered through a powerful 600W amplifier.
Linking Satellites / Subwoofers
Connect the cables coming from the mixer to the fullrange in (5/16) combo input of any component.
Connect a standard XLR microphone cable from the first unit's fullrange (4/15) out XLR output to the
second unit's fullrange in (5/16) combo input. Repeat this process to link subsequent units. Repeat this for
each stack. Make sure that when using multiple tops, they are placed with a proper projection angle.
Note: Do not supply power before all components of the system are set up and connected properly.
Make sure that the Club Mate system is always the last component, which is switched on! When shutting
down, the Club Mate should be the first system, to be switched off.
Set up example