Spectral CYC2000 ORDERCODE 43506
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Spectral CYC2000 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec Spectral CYC2000™ Product Guide Warning.................................................................................…...……………..…………………………….………..… Safety-instructions……………………………………………………………………………………………………….. Operating Determinations.……………………………………………………………………………………………. Rigging.………………………………………………………………………………………………………………….… Return Procedure……………………………………………………………………............................................... Claims……………………………………………………………………...............................................
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never use anything to cover the ground contact. Never look directly into the light source. Never leave any cables lying around. Never use the device during thunderstorms, unplug the device immediately.
OPERATING DETERMINATIONS This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The minimum distance between light-output and the illuminated surface must be more than 1.5 meter. The maximum ambient temperature ta = 45°C must never be exceeded. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place.
Description of the device Features The Spectral CYC2000 indoor/outdoor colour wash is a LED Bar from Showtec • Touring proof • 3 and 5 Pole XLR • Neutrik Powercon Input and Output • RGBWA • 25 x 6° lenses, ideal for Wallwash • Lightweight • Multivoltage (100-240V) • High light-output • Road-proof housing • Max. Distance: 20m (25x 6° lens) • Colour Range: 16.7 million additive RGB colours • Drive current: 350mA • Power consumption:87W max.
DMX Channel Summary TOUR Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 BLOCK1 Channel 1 2 3 4 5 6 7 8 9 BLOCK2 Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ARC1 Channel 1 2 3 ARC1+D Channel 1 2 3 4 Description Master Dimmer Red Green Blue White Amber Color Macro Strobe Auto & Custom Programs Auto Speed Adjustment Dimmer Speed ID Address Selection Block Sections Description Block 1 Red Block 1 Green Block 1 Blue Block 2 Red Block 2 Green Block 2 Blue Block 3 Red Block 3 Green Block 3 Blue Description Bl
ARC2 Channel 1 2 3 4 5 ARC2+D Channel 1 2 3 4 5 6 ARC2+S Channel 1 2 3 4 5 6 7 HSV Channel 1 2 3 Description Red Green Blue White Amber Description Master Dimmer Red Green Blue White Amber Description Master Dimmer Red Green Blue White Amber Strobe Description Hue Saturation Value Overview 1 2 Fig. 1 1) 72 LEDs (18x Red, 18x Green, 18x Blue, 9 White, 9x Amber) 2) Mountingbracket for Truss mounting Backside Fig.
Installation Remove all packing materials from the Spectral CYC2000. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage.
The Spectral CYC2000 has a total of 9 DMX channel configurations, referred to as Personalities. The 9 personalities are [TOUR, BLOCK1, BLOCK2, ARC1, ARC1+D, ARC2, ARC2+D, ARC2+S, HSV]. Each of the different personalities can be accessed from the control panel. Control Panel Fig. 5 A. Display B. MENU Button C. ENTER Button D. Up Button E. Down Button DMX512 ADDRESSING WITHOUT ID ADDRESSING 1) Connect a DMX controller (example 50720 Showdesigner 1024) to the series of Spectral CYC2000„s.
DMX512 ADDRESSING WITH ID ADDRESS (STAG MODE) 1) Connect a DMX controller (example 50720 Showdesigner 1024) to the series of Spectral CYC2000„s. 2) Each Spectral CYC2000„s has 15 DMX channels (DMX address LED Par #1=1, Par #2=16, Par #3=31, Par #4=46, etc.). 3) Any DMX address in the range from 001 to 512 may be used. 4) Each DMX address may carry up to 66 separate ID addresses. 5) The ID Address should be set in the SETTINGS menu, on each unit in ascending values (i.e. 1,2,3...).
MENU OVERVIEW 12
Main Menu Options Press the MODE button to scroll through 11 options of the menu: Creating a static color When you press ENTER in menu Static color, you have to use DOWN to scroll through this menu. Use the UP/DOWN buttons to change the static colors (Red, Green, Blue, White, Amber) or the strobe speed (0-20Hz). Press MENU to go 1 step back. You can combine RED, GREEN, BLUE, WHITE and AMBER to create an infinite range of colors (0-255). Red Set the value of the red LEDs (0-255).
Activating an Auto Program When you press ENTER in menu AUTO, you can choose one of the 10 built-in programs. Press ENTER after selecting the desired auto program, You can select the auto speed of the 10 built-in programs from 000-255. You can also edit 10 custom programs. DMX 512 Address When you press ENTER in menu DMX 512 address you can set the DMX address. You can choose your DMX address between 001-512.
Run Mode • Enter the RUN MODE mode to set the desired working mode: - DMX mode is used when working with a DMX512 controller to control the Spectral. - SLAVE mode is for using the device during a Master-Slave operation. When the fixtures are in Auto program operation, the RUN MODE does not work. Personality Enter the PERSONALITY mode to select a DMX mode: TOUR, BLOCK1, BLOCK2, ARC1, AR1+D, ARC2, AR2+D, AR2+S, HSV.
Changing the Settings 1) Enter the ID Mode and select On in order to allow ID address function. 2) In order to reset the custom modes to its default values select REST. 3) Enter UPLD to upload the custom programs from the current MASTER device to all SLAVE devices. In order to activate the upload function the password must be entered. Password: UP > DOWN > UP > DOWN. Then press ENTER to confirm your password. When uploading the MASTER and SLAVE units will light up YELLOW.
Edit Custom • Enter the EDIT CUSTOM mode to edit the custom programs CUSTOM01 – CUSTOM10. • Each custom program has 30 steps, which can be edited. • Each step allows the creation of a scene using RED, GREEN, BLUE, WHITE, AMBER, STROBE, TIMER & FADE. White Settings • Enter CALIB menu to select the white colors of a certain color temperature. • There are 11 pre-programmed White colors and RGB TO WHITE that can be edited by using RED, GREEN, BLUE, WHITE and AMBER.
Fans With this menu you able to control the fan speed of the device. 1) Press Menu, until the display shows: FANS 2) Press enter to open this menu. Scroll through the menu to set the desired fan speed. Activate Password • Enter the KEY-LOCK mode to select, whether the access password is On or Off. • The Access Password: UP + DOWN + UP + DOWN . When you have pressed ENTER in menu KEY ON, it will take 30 seconds before the LED Par is locked.
How to make your own Custom Program Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values Use Up/Down to change the values And so you
DMX Control TOUR Channel Value 1 000 – 255 2 000 – 255 3 000 – 255 4 000 – 255 5 000 – 255 6 000 – 255 7 000 – 010 011 – 030 031 – 050 051 – 070 071 – 090 091 – 110 111 – 130 131 – 150 151 – 170 171 – 200 201 – 205 206 – 210 211 – 215 216 – 220 221 – 225 226 – 230 231 – 235 236 – 240 241 – 245 246 – 250 251 – 255 8 000 – 010 011 – 255 9 000 – 010 011 – 020 021 – 030 031 – 040 041 – 050 051 – 060 061 – 070 071 – 080 081 – 090 091 – 100 101 – 110 111 – 120 121 – 130 131 – 140 141 – 150 151
10 000 – 255 000 – 009 010 – 029 030 – 069 070 – 129 130 – 189 190 – 255 Channel 12 (ID address selection) 000 – 009 All ID‟s 010 – 019 ID 1 020 – 029 ID 2 030 – 039 ID 3 040 – 049 ID 4 050 – 059 ID 5 060 – 069 ID 6 070 – 079 ID 7 080 – 089 ID 8 090 – 099 ID 9 100 – 109 ID 10 110 – 119 ID 11 120 – 129 ID 12 130 – 139 ID 13 140 – 149 ID 14 150 – 159 ID 15 160 – 169 ID 16 170 – 179 ID 17 180 – 189 ID 18 190 – 199 ID 19 200 – 209 ID 20 210 ID 21 211 ID 22 11 13 000 – 004 005 – 034 035 – 064 065 – 094 095 –
AUTO • Channel 9 selects the preset AUTO and CUSTOM programs (1-10). • Channel 9 has priority over channels 2, 3, 4, 5, 6, 7 and 8. • When activating the custom AUTO programs 1-10, it is possible to control the Step Time (CH2) and Fade Time (CH3). DIMMER SPEED Enter DIM Mode (CH11) to select specific dimmer mode and dimmer speed. When DIMMER is set to OFF, then RGBW and the MASTER DIMMER are linear. Dim 1/2/3/4 are speed modes of the non linear dimmer. DIM1 is fastest, and DIM4 is slowest.
DMX Control BLOCK2 Channel Value 1 000 – 255 2 000 – 255 3 000 – 255 4 000 – 255 5 000 – 255 6 000 – 255 7 000 – 255 8 000 – 255 9 000 – 255 10 000 – 255 11 000 – 255 12 000 – 255 13 000 – 255 14 000 – 255 15 000 – 255 Function Block 1 Red 0 – 100 % Block 1 Green 0 – 100 % Block 1 Blue 0 – 100 % Block 1 White 0 – 100 % Block 1 Amber 0 – 100 % Block 2 Red 0 – 100 % Block 2 Green 0 – 100 % Block 2 Blue 0 – 100 % Block 2 White 0 – 100 % Block 2 Amber 0 – 100 % Block 3 Red 0 – 10
DMX Control ARC2 Channel Value 1 000 – 255 2 000 – 255 3 000 – 255 4 000 – 255 5 000 – 255 Function Red 0 – 100 % Green 0 – 100 % Blue 0 – 100 % White 0 – 100 % Amber 0 – 100 % DMX Control ARC2+D Channel Value 1 000 – 255 2 000 – 255 3 000 – 255 4 000 – 255 5 000 – 255 6 000 – 255 Function Dimmer 0 – 100 % Red 0 – 100 % Green 0 – 100 % Blue 0 – 100 % White 0 – 100 % Amber 0 – 100 % DMX Control ARC2+S Channel Value 1 000 – 255 2 000 – 255 3 000 – 255 4 000 – 255 5 000 –
DMX Value – ID Addresses DMX 0-9 10-19 20-29 30-39 40-49 50-59 60-69 70-79 80-89 90-99 100-109 110-119 120-129 130-139 140-149 150-159 160-169 170-179 180-189 190-199 200-209 210 211 212 213 214 215 216 217 218 219 220 221 222 ID addresses Select all ID addresses ID address #1 ID address #2 ID address #3 ID address #4 ID address #5 ID address #6 ID address #7 ID address #8 ID address #9 ID address #10 ID address #11 ID address #12 ID address #13 ID address #14 ID address #15 ID address #16 ID address #17 I
Beam Angles 26
Connection Cables Take care of the connector cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability, which is always to your advantage. Periodically check that your cables are in good condition, that they are correctly wired and that all their contacts are perfectly efficient: a great number of problems are caused entirely by using unsuitable or faulty cables.
Product Specification Power Supply: AC 100V-240V, 50/60 Hz Power consumption:87W max. at full output Light source: 72 LEDs: 18 x 750 mA red 18 x 1.000 mA green 18 x 1.000mA blue 9 x 1.000 mA white 9 x 1.000 mA amber Dimensions: 990 x 156 x 75 mm (LxWxH) Weight: 5 kg 3 and 5 Pole XLR In and Out Neutrik Powercon Input and Output 25 x 6° lenses, ideal for Wallwash Multivoltage (100-240V) Max. Distance: 20m (25x 6° lens) Colour Range: 16.