X-12A ORDERCODE D3252
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio X-12A brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
DAP Audio DAP Audio X-12A Product Guide Warning..…...................................................................................………………………………………….................... 2 Safety-instructions………………………………………………………………………………………….….................. 3 Operating Determinations……………………………………………………………………………………............... 4 Description..…..............................................................................……….…………………………………................... 5 Features………………………………………………………………………………….………………….…..........
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
WARNING CAUTION! Keep this system away from rain and moisture! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this system has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires! Before you initial start-up, please make sure that there is no damage caused by transportation.
Make sure that the available voltage is not higher than stated on the rear panel. Make sure that the power-cord is never crimped or damaged. Check the system and the powercord from time to time. Please turn off the power switch, when changing the power cord or signal cable, or select the input mode switch. Extreme frequency boosts in connection with a high input signal level may lead to overdriving your equipment.
Description of the device Features The X-12A is an active 2-way Fullrange speakersystem: • Lightweight switched mode power supply • Separate amplifiers for mid and high speaker • Active 2 way crossover network • User adjustable crossover frequency 60Hz-250Hz, 24dB/oct. • Multiband limiter circuit for optimal tone balance and sound pressure level • Loudness switch for enhanced low frequency response • Ground lift switch • Extra low frequency balanced output Overview Fig.
Controlpanel Fig. 2 1) Volume Use to adjust the input volume level for the X-12A. 2) Limiter LED We suggest you to set the input level with the L-R level controls in such way that the LED blinks occasionally. If the LED lights up continuously we strongly suggest you to lower the Volume control (1). 3) Loudness Button The loudness circuit amplifies certain frequencies in order to get a more full sound at low volumes.
Operation Installation Remove all packing materials from the X-12A. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 240V power, or vice versa.
Maintenance The X-12A requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specifications Power supply: 230V 50/60Hz Fuse: T4A Loudness Switch Ground Lift Switch Auxiliary XLR Low Out Build In Subsonic Filter Multiband Limiters Woofer: ER-1264F-4, 4 Ohm, 64 mm Voice Coil High Driver: XCT-448CS, 8 Ohm, 1.75" Titanium Dome 44 mm Voice Coil Amplifier Output Power Low: 200 Watt RMS Amplifier Output Power High: 100 Watt RMS Freq. Response (-3 dB): 60 – 16.000 Hz Freq. Range (-10 dB): 42 – 20.
2009 Dap Audio.