Product guide

15
Operations
Selecting Folders
• Make sure you’re in the file system/ folder structure panel (see page 24). Push the back (46) button to
return to the file system/ folder structure panel if you are in the file/ search results panel. Dial the track
select (43) encoder to browse the folders.
• Push the track select (43) encoder to open the desired folder. Now you’re in the file/ search results
panel and are ready to select a track as described before.
• Push the back (46) button to return to the file system/folder structure panel.
Selecting tracks using the track select encoder
• Make sure you have opened the desired folder as described in Selecting folders and that you are in
the file/ search results panel (see page 24)
• Dial the track select (43) encoder to browse the tracks.
• Push the load 1 (33) button, the load 2 (44) button, the load 3 (35) button or the load 4 (45) button to
load the track in respectively deck 1, deck 2, deck 3 or deck 4.
Starting Playback
• Push the play (28) button during the pause mode or cue mode to start playback, the LED in the play
(28) button lights up.
Stop Playback
There are two ways to stop playback:
• Push the play (28) button during playback to pause at that point.
• Push the cue (10) button during playback to return to the cue point and enter pause condition.
Pausing
• Push the play (28) button to pause playback.
• The play (28) button blinks when the pause mode is set.
• Playback resumes when the play (28) button is pushed again.
Setting a Cue Point
• Push the play (28) button to toggle between play mode and pause mode.
• The play (28) indicator flashes as the deck is in pause mode.
• Dial the jogwheel (9) to go to the desired cue point.
• Push the cue (10) button and your cue point will be stored. The cue point will be indicated in the
waveform display as shown in figure 6 on page 16.
• Push the play (28) button to continue playback.
Setting a hot cue point in pause mode
• Push the play (28) button to stop playback.
• The play indicator flashes when the pause mode is set.
• Turn the jogwheel (9) to go to the desired Cue point.
• Push the desired hot cue (1/2 beats (4), 2/4 beats (15), 3/8 beats (22), 4/16 beats (23)) button and
your hot cue point will be stored.
• The stored hot cue point will be indicated in the Waveform display as shown in figure 6 on page 16.
• Push the play (28) button to continue playback.