User manual

Chapter 7 Digital Routing

Figure 7-2. Connecting Timing Signals

Routing Signals in Software

Table 7-1 lists the basic functions you can use to route signals.

Note For more information about routing signals in software, refer to the NI-DAQmx Help

or the LabVIEW 8.x Help.

Table 7-1. Functions For Routing Signals.

Language Program Function

LabVIEW NI-DAQmx DAQmx Export Signal.vi and

DAQmx Connect Terminals.vi

Traditional NI-DAQ (Legacy) Route Signal.vi

C NI-DAQmx Export_Signal and

DAQmx_Connect_Terminals

Traditional NI-DAQ (Legacy) Select_Signal

PFI 0

Source

D GND

PFI 0

PFI 2

Source

I/O Connector

E Series Device