User manual

Appendix A Device-Specific Information

Note The BNC version of the DAQPad-6020E has a 30-pin I/O connector.

Because the DAQPad-6020E has no DIP switches, jumpers, or

potentiometers, you can easily configure and calibrate it through software.

There are three versions of the DAQPad-6020E offering different I/O

connectivity and form factors. These versions are illustrated in Table A-3.

Note The DAQPad-6020E devices are compatible with Traditional NI-DAQ (Legacy)

only.

Table A-3. DAQPad-6020E Versions

Model I/O Connector Form Factor

DAQPad-6020E Half-Size 68-pin SCSI-II Male Half-size box

(5.8 in. × 8.4 in. × 1.5 in.)

Desktop use

DAQPad-6020E Full-Size 68-pin SCSI-II Male Full-size box

(12.1 in. × 10 in. × 1.7 in.)

Rack-mountable, stackable

DAQPad-6020E BNC BNC and removable screw

terminals

Full-size box

(12.1 in. × 10 in. × 1.7 in.)

Rack-mountable, stackable