User manual

© National Instruments Corporation I-1 NI-DAQ User Manual for PC Compatibles
Index
Numbers
1200 series devices. See Lab and
1200 series devices.
4451and 4551 devices
counter usage, 3-50
FIFO lag effect, 3-51 to 3-52
6025E groups of ports, 3-55
6115 and 6120 devices. See PCI-6115 and
PCI-6120 devices.
622X devices
counter usage, 3-50
FIFO lag effect, 3-51 to 3-52
652X devices
digital change detection applications, 3-60
digital change notification
applications, 3-60
653X devices
digital change detection
applications, 3-61 to 3-62
groups of ports, 3-55 to 3-56
pattern generation, 3-74 to 3-75
RTSI connections, 3-105 to 3-106
660X devices, RTSI connections, 3-103
671X devices
counter usage, 3-50
FIFO lag effect, 3-51 to 3-52
RTSI connections, 3-103
A
ACK1 signal
653X RTSI connections (table), 3-105
DIO-32F RTSI connections (table), 3-104
ACK2 signal
653X RTSI connections (table), 3-105
DIO-32F RTSI connections (table), 3-104
ActiveX controls for Visual Basic, 3-6 to 3-7
AI device terminology (table), xv-xvii
AI_Change_Parameter function, 3-16
AI_Check function, 3-16
AI_Clear function, 3-16
AI_Configure function, 3-16
AI_Mux_Config function, 3-17
AI_Read function, 3-17
AI_Read_Scan function, 3-17
AI_Read_VScan function, 3-17
AI_Setup function, 3-17
AI_VRead function, 3-17
AI_VScale function, 3-17
Align_DMA_Buffer function, 3-2
Am9513-based devices
gating modes, 3-79
timebases, 3-78
AMUX-64T external multiplexer support, 3-25
Analog Alarm Event control, 3-11 to 3-13
properties (table), 3-11
setting program flow, 3-12 to 3-13
setting properties, 3-12
analog input application tips. See data
acquisition application tips.
analog input functions. See data acquisition
functions; one-shot analog input functions.
analog output application tips, 3-36 to 3-38
equivalent analog output calls (figure), 3-36
SCXI applications, 3-126
simple application, 3-37
software update application, 3-37 to 3-38
analog output devices, reference voltages for
(tables),3-49to3-50
analog output functions, 3-35 to 3-36. See also
waveform generation functions.
AO_Change_Parameter, 3-35
AO_Configure, 3-35
AO_Update, 3-35