User manual

Index
© National Instruments Corporation I-9 NI-DAQ User Manual for PC Compatibles
G
GATE2 signal (table), 3-104
gated pulse generation, 3-83 to 3-84
gating modes, Am9513-based devices, 3-79
General DAQ Event controls, 3-7 to 3-9
examples, 3-13 to 3-15
properties (table), 3-7 to 3-8
setting properties, 3-8 to 3-9
general-purpose counter/timer functions
application tips, 3-94 to 3-95
GPCTR_Change_Parameter, 3-93, 4-10
GPCTR_Config_Buffer, 3-93
GPCTR_Control, 3-93
GPCTR_Read_Buffer, 3-93
GPCTR_Set_Application, 3-93
GPCTR_Watch, 3-93
Get_DAQ_Device_Info function, 3-2
Get_NI_DAQ_Version function, 3-2
GPCTR_Change_Parameter function,
3-93, 4-10
GPCTR_Config_Buffer function, 3-93
GPCTR_Control function, 3-93
GPCTR_Read_Buffer function, 3-93,
4-11, 4-12
GPCTR_Set_Application function, 3-93
GPCTR_Watch function, 3-93
group digital I/O applications
digital double-buffered group block I/O,
3-71 to 3-73
digital group block I/O, 3-69 to 3-70
digital group I/O, 3-67 to 3-68
group digital I/O functions, 3-58 to 3-59
DIG_Block_Check, 3-58
DIG_Block_Clear, 3-58
DIG_Block_In, 3-58
DIG_Block_Out, 3-58
DIG_Block_PG_Config, 3-58
DIG_Grp_Config, 3-58
DIG_Grp_Mode, 3-58
DIG_Grp_Status, 3-58
DIG_In_Grp, 3-58
DIG_Out_Grp, 3-59
DIG_SCAN_Setup, 3-59
DIG_Trigger_Config, 3-59
groups of ports
DIO-24, 6025E, AT-MIO-16DE-10,
DIO-96, and Lab and 1200 series
groups, 3-55
DIO-32F and 653X groups, 3-55 to 3-56
PCI-6115 and PCI-6120
groups, 3-56 to 3-57
H
handshaking mode, 3-54 to 3-55
handshaking versus no-handshaking
digital I/O, 3-63
hardware support (tables), 1-4 to 1-6
high-level data acquisition
functions, 3-20 to 3-21
application tips. See data acquisition
application tips.
DAQ_Op, 3-20
DAQ_to_Disk, 3-20
Lab_ISCAN_Op, 3-20
Lab_ISCAN_to_Disk, 3-20
SCAN_Op, 3-21
SCAN_to_Disk, 3-21
high-level waveform generation
functions, 3-39
WFM_from_Disk, 3-39
WFM_Op, 3-39
I
ICTR_Read function, 3-91
ICTR_Reset function, 3-91
ICTR_Setup function, 3-91
Init_DA_Brds function, 3-2