User manual

Index
NI-DAQ User Manual for PC Compatibles I-10 ni.com
initialization and general-configuration
functions
Align_DMA_Buffer, 3-2
Get_DAQ_Device_Info, 3-2
Get_NI_DAQ_Version, 3-2
Init_DA_Brds, 3-2
Set_DAQ_Device_Info, 3-3
Timeout_Config, 3-3
installation. See also device configuration.
flowchart for setting up your system, 1-3
setting up your DAQ system, 1-2 to 1-3
Inter Range Instrumentation Group (IRIG)
time code protocols, 3-97 to 3-98
interval counter/timer functions, 3-91 to 3-92
application tips, 3-92
device support (table), 3-76
ICTR_Read, 3-91
ICTR_Reset, 3-91
ICTR_Setup, 3-91
interval counter/timer operation. See also
counter/timer operation.
block diagram, 3-92
ICTR functions, 3-92
IRIG (Inter Range Instrumentation Group)
time code protocols, 3-97 to 3-98
L
Lab and 1200 series devices
counter usage in waveform
generation, 3-50 to 3-51
data acquisition application tips, 3-24
groups of ports, 3-55
interval counter/timer operation, 3-92
reference voltages for waveform
generation (tables), 3-50
Lab_ISCAN_Check function, 3-22
Lab_ISCAN_Op function, 3-20
Lab_ISCAN_Start function, 3-22
Lab_ISCAN_to_Disk function, 3-20
languages supported by NI-DAQ, 1-7
libraries, NI-DAQ, 2-1
low-level data acquisition
functions, 3-21 to 3-23
application tips. See data acquisition
application tips.
DAQ_Check, 3-21
DAQ_Clear, 3-21
DAQ_Config, 3-21
DAQ_Monitor, 3-21
DAQ_Rate, 3-22
DAQ_Set_clock, 3-22
DAQ_Start, 3-22
DAQ_StopTrigger_Config, 3-22
DAQ_VScale, 3-22
Lab_ISCAN_Check, 3-22
Lab_ISCAN_Start, 3-22
SCAN_Demux, 3-22
SCAN_Sequence_Demux,
3-22 to 3-23, 3-33
SCAN_Sequence_Retrieve, 3-23, 3-33
SCAN_Sequence_Setup, 3-23, 3-33
SCAN_Setup, 3-23
SCAN_Start, 3-23
low-level double-buffered data acquisition
functions, 3-23 to 3-24
application tips. See data acquisition
application tips.
DAQ_DB_Config, 3-23, 4-10
DAQ_DB_HalfReady, 3-24, 4-12
DAQ_DB_Transfer, 3-24, 4-11
low-level waveform generation
functions, 3-39 to 3-41
WFM_Chan_Control, 3-39, 3-52
WFM_Check, 3-39, 3-52
WFM_ClockRate, 3-39
WFM_DB_Config, 3-40
WFM_DB_HalfReady, 3-40
WFM_DB_Transfer, 3-40
WFM_Group_Control, 3-40
WFM_Group_Setup, 3-40
WFM_Load, 3-40