User manual

Index
NI-DAQ User Manual for PC Compatibles I-12 ni.com
O
one-shot analog input functions, 3-16 to 3-19
AI_Change_Parameter, 3-16
AI_Check, 3-16
AI_Clear, 3-16
AI_Configure, 3-16
AI_Mux_Config, 3-17
AI_Read, 3-17
AI_Read_Scan, 3-17
AI_Read_VScan, 3-17
AI_Setup, 3-17
AI_VRead, 3-17
AI_VScale, 3-17
application tips, 3-17 to 3-19
one-shot analog output functions
AO_Change_Parameter, 3-35
AO_Configure, 3-35
AO_Update, 3-35
AO_VScale, 3-36
AO_VWrite, 3-36
AO_Write, 3-36
application tips, 3-36 to 3-38
OUT0* signal (table), 3-104
OUT1* signal (table), 3-104
OUT2* signal (table), 3-104
P
Parallel mode applications, SCXI
modules, 3-120 to 3-124
parameter passing in Windows applications
Microsoft Visual Basic, 2-6
Microsoft Visual C++, 2-3
pattern generation I/O with DIO-32F, 653X,
PCI-6115, and PCI-6120
devices, 3-74 to 3-75
PC-DIO-24 groups of ports, 3-55
PC-DIO-96 groups of ports, 3-55
PCI-4451 devices
counter usage, 3-50
FIFO lag effect, 3-51 to 3-52
PCI-6115 and PCI-6120 devices
groups of ports, 3-56 to 3-57
pattern generation, 3-74 to 3-75
PCLK1 signal (table), 3-105
PCLK2 signal (table), 3-105
PC-LPM-16
counter/timer signals, 3-25
interval counter/timer operation, 3-92
LPM16_Calibrate function, 3-4
period and continuous pulse-width
measurement applications, 3-89 to 3-91
plug-in device support
AT, PC and NEC buses (table), 1-4
PC Card, CardBus, and VXI buses
(table), 1-5
PCI buses (table), 1-4
PXI buses (table), 1-5
programmable frequency output
operation, 3-81
pulse generation
application tips, 3-83 to 3-84
CTR_Pulse function, 3-77
flow chart, 3-83
retriggerable one-shot pulse, 3-84
pulse per second
synchronization, 3-96 to 3-97
pulse width measurement
event-counting application, 3-86 to 3-87
period and continuous pulse-width
measurement applications,
3-89 to 3-91
R
reference voltages for analog output devices
bipolar output polarity
(table), 3-49 to 3-50
unipolar output polarity (table), 3-49