User manual
Index
© National Instruments Corporation I-13 NI-DAQ User Manual for PC Compatibles
REQ1 signal
653X RTSI connections (table), 3-105
DIO-32F RTSI connections (table), 3-104
REQ2 signal
653X RTSI connections (table), 3-105
DIO-32F RTSI connections (table), 3-104
retriggerable one-shot pulse, 3-84
RTD_Buf_Convert function, 5-2 to 5-4
RTD_Convert function
definition, 5-1
purpose and use, 5-2 to 5-4
RTSI bus
application tips, 3-106 to 3-107
description, 3-102 to 3-103
RTSI bus connections, 3-103 to 3-106
653X devices, 3-105 to 3-106
AT-AO-6/10, 3-104
DIO-32F, 3-104 to 3-105
E series, DSA, 660XX, and 671X, 3-103
RTSI bus trigger functions
RTSI_Clear, 3-102
RTSI_Clock, 3-102
RTSI_Conn, 3-102
RTSI_DisConn, 3-102
Select_Signal, 3-102
S
SCAN_Demux function, 3-22
SCAN_Op function, 3-21
SCAN_Sequence_Demux function,
3-22 to 3-23, 3-33
SCAN_Sequence_Retrieve function,
3-23, 3-33
SCAN_Sequence_Setup function, 3-23, 3-33
SCAN_Setup function, 3-23
SCAN_Start function, 3-23
SCAN_to_Disk function, 3-21
SCXI application tips, 3-112 to 3-124
analog output applications, 3-126
data acquisition rates, 3-124 to 3-126
digital applications, 3-127
general SCXIbus application
flowchart, 3-112
Multiplexed mode, 3-113 to 3-120
Parallel mode, 3-120 to 3-124
SCXI-1200 module settling rates
(table), 3-126
settling rates (table), 3-125
settling times (table), 3-125
SCXI functions, 3-107 to 3-111
SCXI_AO_Write, 3-107
SCXI_Cal_Constants, 3-107
SCXI_Calibrate, 3-107 to 3-108
SCXI_Calibrate_Setup, 3-108
SCXI_Change_Chan, 3-108
SCXI_Configure_Connection, 3-108
SCXI_Configure_Filter, 3-108
SCXI_Get_Chassis_Info, 3-109
SCXI_Get_Module_Info, 3-109
SCXI_Get_State, 3-109
SCXI_Get_Status, 3-109
SCXI_Load_Config, 3-109
SCXI_ModuleID_Read, 3-109
SCXI_MuxCtr_Setup, 3-110
SCXI_Reset, 3-110
SCXI_Scale, 3-110
SCXI_SCAN_Setup, 3-110
SCXI_Set_Config, 3-110
SCXI_Set_Excitation, 3-110
SCXI_Set_Gain, 3-111
SCXI_Set_Input_Mode, 3-111
SCXI_Set_State, 3-111
SCXI_Set_Threshold, 3-111
SCXI_Single_Chan_Setup, 3-111
SCXI_Track_Hold_Control, 3-111
SCXI_Track_Hold_Setup, 3-111
SCXI_Calibrate function, 3-4, 3-107 to 3-108
Select_Signal function, 3-4, 3-102
Set_DAQ_Device_Info function, 3-3
setting up DAQ systems. See device
configuration; installation.