User manual

Index
NI-DAQ User Manual for PC Compatibles I-14 ni.com
simultaneous counter operations (figure), 3-85
single-buffered versus double-buffered
data, 4-1 to 4-2
single-channel analog input
functions, 3-16 to 3-19
AI_Change_Parameter, 3-16
AI_Check, 3-16
AI_Clear, 3-16
AI_Configure, 3-16
AI_Mux_Config, 3-17
AI_Read, 3-17
AI_Read_Scan, 3-17
AI_Read_VScan, 3-17
AI_Setup, 3-17
AI_VRead, 3-17
AI_VScale, 3-17
application tips, 3-17 to 3-19
software-calibration and device-specific
functions, 3-3 to 3-4
AO_Calibrate, 3-3
Calibrate_1200, 3-3 to 3-4
Calibrate_DSA, 3-4
Calibrate_E_Series, 3-4
Calibrate_TIO, 3-4
Configure_HW_Analog_Trigger, 3-4
LPM16_Calibrate, 3-4
MIO_Config, 3-4
SCXI_Cal_Constants, 3-107
SCXI_Calibrate, 3-4, 3-107 to 3-108
SCXI_Calibrate_Setup, 3-108
Select_Signal, 3-4, 3-102
square wave generation functions, 3-84
STOPTRIG1 signal (table), 3-105
STOPTRIG2 signal (table), 3-105
Strain_Buf_Convert function, 5-4 to 5-6
Strain_Convert function
definition, 5-1
purpose and use, 5-4 to 5-6
string passing in Windows applications
Microsoft Visual Basic, 2-6
Microsoft Visual C++, 2-3
synchronization of clocks. See clocks or time
counters for NI-TIO devices.
system integration, by National
Instruments, A-1
T
technical support resources, A-1 to A-2
Thermistor_Buf_Convert function, 5-7 to 5-9
Thermistor_Convert function
definition, 5-1
purpose and use, 5-7 to 5-9
Thermocouple_Buf_Convert
function, 5-9 to 5-11
Thermocouple_Convert function
definition, 5-1
purpose and use, 5-9 to 5-11
time counters. See clocks or time counters for
NI-TIO devices.
time-lapse measurement, 3-87
Timeout_Config function, 3-3
transducer conversion functions, 5-1 to 5-11
overview, 5-1 to 5-2
RTD_Buf_Convert, 5-2 to 5-4
RTD_Convert, 5-1, 5-2 to 5-4
Strain_Buf_Convert, 5-4 to 5-6
Strain_Convert, 5-1, 5-4 to 5-6
Thermistor_Buf_Convert, 5-7 to 5-9
Thermistor_Convert, 5-1, 5-7 to 5-9
Thermocouple_Buf_Convert, 5-9 to 5-11
Thermocouple_Convert, 5-1, 5-9 to 5-11
V
Visual Basic. See Microsoft Visual Basic for
Windows.